This test runs to a breakpoint on thread 0. Thread 0 then starts
thread 2 and 3, which both have breakpoints in them.
In https://lab.llvm.org/buildbot/#/builders/96/builds/41674
I think that we managed to do the first check on thread 2 before
thread 3 had started. Therefore "thread continue 3" failed.
So wait for all three to startup before we check their status.
I considered putting a timeout on the while like the wait_for... methods,
but the test itself already has a global timeout. Plus, I'd rather
not be tuning a timeout per piece of hardware this runs on.
99% of the time we will already have 3 threads when the check is done.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D154705
Add support for compressed CTF data. The flags in the header can
indicate whether the CTF body is compressed with zlib deflate. This
patch supports inflating the data before parsing.
Differential revision: https://reviews.llvm.org/D155221
Add support for the Compact C Type Format (CTF) in LLDB. The format
describes the layout and sizes of C types. It is most commonly consumed
by dtrace.
We generate CTF for the XNU kernel and want to be able to use this in
LLDB to debug kernels for which we don't have dSYMs (anymore). CTF is a
much more limited debug format than DWARF which allows is to be an order
of magnitude smaller: a 1GB dSYM can be converted to a handful of
megabytes of CTF. For XNU, the goal is not to replace DWARF, but rather
to have CTF serve as a "better than nothing" debug info format when
DWARF is not available.
It's worth noting that the LLVM toolchain does not support emitting CTF.
XNU uses ctfconvert to generate CTF from DWARF which is used for
testing.
Differential revision: https://reviews.llvm.org/D154862
Fix a crash when trying to complete an ambiguous subcommand. Take `set s
tar` for example: for the subcommand `s` there's ambiguity between set
and show. Pressing TAB after this input currently crashes LLDB. The
problem is that we're trying to complete `tar` but give up at `s`
because of the ambiguity. LLDB doesn't expect the completed string to be
shorter than the current string and crashes when trying to eliminate the
common prefix.
rdar://111848598
Differential revision: https://reviews.llvm.org/D154643
-g is specified by passing in nullptr ExecutionContext, but in some
load-script-from-symbol-file specific code, the ExecutionContext was
asked for its Target w/o checking whether the pointer was null.
Fix that and add a test.
The ordering in which functions are presented to the expression evaluator in
this test setting triggers a known bug in LLDB.
Differential Revision: https://reviews.llvm.org/D154843
Previously the following would crash:
(lldb) run
Process 2594053 launched: '/tmp/test.o' (aarch64)
Process 2594053 exited with status = 0 (0x00000000)
(lldb) register read <tab>
As the completer assumed that the execution context would always
have a register context. After a program has finished, it does not.
Split out the generic parts of the test from the x86 specific tests,
and added "register info" to both.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D154413
This test previously ran on QEMU or A64FX both of which can/do have
512 bit SVE by default.
Graviton 3 has 256 bit SVE so the first part of the test failed.
To fix this, probe the supported vector lengths before starting
the test. The first check will use the default vector length and
the rest use either 256 or 128 bit.
Therefore this test will be skipped on a machine with only 128 bit SVE.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D154208
During __do_global_dtors_aux glibc sets a flag that is right
next to the global variable. This is done using a store byte.
On QEMU the watchpoints are handled with a finer granularity
than real hardware, so this wasn't a problem. On Graviton 3
(and Mountain Jade, though this test won't run there) watchpoints
look at larger chunks of memory.
This means that the final continue actually stops in __do_global_dtors_aux
instead of exiting.
We could fix this by padding the global to be away from the flag,
but that is fiddly and it is easier just to remove the watchpoint
before the final continue. We have already verified it worked by that
point.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D154201
Running this on Amazon Ubuntu the final backtrace is:
```
(lldb) thread backtrace
* thread #1, name = 'a.out', stop reason = breakpoint 1.1
* frame #0: 0x0000aaaaaaaa07d0 a.out`func_c at main.c:10:3
frame #1: 0x0000aaaaaaaa07c4 a.out`func_b at main.c:14:3
frame #2: 0x0000aaaaaaaa07b4 a.out`func_a at main.c:18:3
frame #3: 0x0000aaaaaaaa07a4 a.out`main(argc=<unavailable>, argv=<unavailable>) at main.c:22:3
frame #4: 0x0000fffff7b373fc libc.so.6`___lldb_unnamed_symbol2962 + 108
frame #5: 0x0000fffff7b374cc libc.so.6`__libc_start_main + 152
frame #6: 0x0000aaaaaaaa06b0 a.out`_start + 48
```
This causes the test to fail because of the extra ___lldb_unnamed_symbol2962 frame
(an inlined function?).
To fix this, strictly check all the frames in main.c then for the rest
just check we find __libc_start_main and _start in that order regardless
of other frames in between.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D154204
We recently saw an uptick in internal reports complaining that LLDB is
slow when sources on network file systems are inaccessible. I looked at
the SourceManger and its cache and I think there’s some room for
improvement in terms of reducing file system accesses:
1. We always resolve the path.
2. We always check the timestamp.
3. We always recheck the file system for negative cache hits.
D153726 fixes (1) but (2) and (3) are necessary because of the cache’s
current design. Source files are cached at the debugger level which
means that the source file cache can span multiple targets and
processes. It wouldn't be correct to not reload a modified or new file
from disk.
We can however significantly reduce the number of file system accesses
by using a two level cache design: one cache at the debugger level and
one at the process level:
- The cache at the debugger level works the way it does today. There is
no negative cache: if we can't find the file on disk, we'll try again
next time the cache is queried. If a cached file's timestamp changes
or if its path remapping changes, the cached file is evicted and we
reload it from disk.
- The cache at the process level is design to avoid accessing the file
system. It doesn't check the file's modification time. It caches
negative results, so if a file didn't exist, it doesn't try to reread
it from disk. Checking if the path remapping changed is cheap
(doesn't involve checking the file system) and is the only way for a
file to get evicted from the process cache.
The result of this patch is that LLDB will not show you new content if a
file is modified or created while a process is running. I would argue
that this is what most people would expect, but it is a change from how
LLDB behaves today.
For an average stop, we query the source cache 4 times. With the current
implementation, that's 4 stats to get the modification time, If the file
doesn't exist on disk, that's an additional 4 stats. Before D153726, if
the path starts with a ~ there are another additional 4 calls to
realpath. When debugging sources on a slow (network) file system, this
quickly adds up.
In addition to the two level caching, this patch also adds a source
logging channel and synchronization to the source file cache. The
logging was helpful during development and hopefully will help us triage
issues in the future. The synchronization isn't a new requirement: as
the cache is shared across targets, there is no guarantees that it can't
be accessed concurrently. The patch also fixes a bug where we would only
set the source remapping ID if the un-remapped file didn't exist, which
led to the file getting evicted from the cache on every access.
rdar://110787562
Differential revision: https://reviews.llvm.org/D153834
D68678 added a test that ensures an Apple accelerator lookup is done
efficiently. Since these tables are not used for DWARF 5, we should decorate the
test appropriately.
Differential Revision: https://reviews.llvm.org/D154268
While looking at https://github.com/llvm/llvm-project/issues/61955
I noticed that when we send qLaunchGDBServer we check that we got a response
but not what kind of response it was.
I think this was why the bug reporter saw:
(lldb) run
error: invalid host:port specification: '[192.168.64.2]'
The missing port is because we went down a path we only should have
chosen if the operation succeeded. Since we didn't check, we went ahead
with an empty port number.
To test this I've done the following:
* Make a temporary copy of lldb-server.
* Run that as a platform.
* Remove the copy.
* Attempt to create and run a target.
This fails because the running lldb-server will try to invoke itself
and it no longer exists.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D153513
ObjectFileMachO::SetLoadAddress() should allow for a DATA segment
that has no file content to be slid in the vmaddr, it is valid
to have such a section.
Differential Revision: https://reviews.llvm.org/D154037
rdar://99744343
Adds support for a reverse DAP request to startDebugging. The new request can be used to launch child processes from lldb scripts, for example it would be start forward to configure a debug configuration for a server and a client allowing you to launch both processes with a single debug configuraiton.
Reviewed By: wallace, ivanhernandez13
Differential Revision: https://reviews.llvm.org/D153447
This reverts commit 3254623d73.
One test has been updated to add the "-s" flag which along with
86fd957af9 should fix the tests on MacOS.
An assert on hijack listener added in that patch was removed, it seems
to be correct on MacOS but not on Linux.
This fixes#62068.
After 8d1de7b34a the following issue appeared:
```
$ ./bin/lldb /tmp/test.o
(lldb) target create "/tmp/test.o"
Current executable set to '/tmp/test.o' (aarch64).
(lldb) platform process launch -s
error: Cannot launch '': Nothing to launch
```
Previously would call target->GetRunArguments when there were no extra
arguments, so we could find out what target.run-args might be.
Once that change started relying on the first arg being the exe,
the fact that that call clears the existing argument list caused the bug.
Instead, have it set a local arg list and append that to the existing
one. Which in this case will just contain the exe name.
Since there's no existing tests for this command I've added a new file
that covers enough to check this issue.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D153636
Add two new source subcommands: source cache dump and source cache
clear. As the name implies the first one dumps the source cache while
the later clears the cache.
This patch was motivated by a handful of (internal) bug reports related
to sources not being available. Right now those issues can be hard to
diagnose. The new commands give users, as well as us as developers, more
insight into and control over the source cache.
Differential revision: https://reviews.llvm.org/D153685
The Objective-C runtime and the shared cache has changed slightly.
Given a class_ro_t, the baseMethods ivar is now a pointer union and may
either be a method_list_t pointer or a pointer to a relative list of
lists. The entries of this relative list of lists are indexes that refer
to a specific image in the shared cache in addition to a pointer offset
to find the accompanying method_list_t. We have to go over each of these
entries, parse it, and then if the relevant image is loaded in the
process, we add those methods to the relevant clang Decl.
In order to determine if an image is loaded, the Objective-C runtime
exposes a symbol that lets us determine if a particular image is loaded.
We maintain a data structure SharedCacheImageHeaders to keep track of
that information.
There is a known issue where if an image is loaded after we create a
Decl for a class, the Decl will not have the relevant methods from that
image (i.e. for Categories).
rdar://107957209
Differential Revision: https://reviews.llvm.org/D153597
This patch should address the failure of TestStackCoreScriptedProcess
that is happening specifically on x86_64.
It turns out that in 1370a1cb5b, I changed the way we extract integers
from a `StructuredData::Dictionary` and in order to get a stop info from
the scripted process, we call a method that returns a `SBStructuredData`
containing the stop reason data.
TestStackCoreScriptedProcess` was failing specifically on x86_64 because
the stop info dictionary contains the signal number, that the `Scripted
Thread` was trying to extract as a signed integer where it was actually
parsed as an unsigned integer. That caused `GetValueForKeyAsInteger` to
return the default value parameter, `LLDB_INVALID_SIGNAL_NUMBER`.
This patch address the issue by extracting the signal number with the
appropriate type and re-enables the test.
Differential Revision: https://reviews.llvm.org/D152848
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This teaches DumpRegisterInfo to generate a table from the register
flags type. It just calls a method on RegisterFlags.
As such, the extra tests are minimal and only show that the intergration
works. Exhaustive formatting tests are done with RegisterFlags itself.
Example:
```
(lldb) register info cpsr
Name: cpsr
Size: 4 bytes (32 bits)
In sets: general (index 0)
| 31 | 30 | 29 | 28 | 27-26 | 25 | 24 | 23 | 22 | 21 | 20 | 19-13 | 12 | 11-10 | 9 | 8 | 7 | 6 | 5 | 4 | 3-2 | 1 | 0 |
|----|----|----|----|-------|-----|-----|-----|-----|----|----|-------|------|-------|---|---|---|---|---|-----|-----|---|----|
| N | Z | C | V | | TCO | DIT | UAO | PAN | SS | IL | | SSBS | | D | A | I | F | | nRW | EL | | SP |
```
LLDB limits the max terminal width to 80 chars by default.
So to get that full width output you will need to change the "term-width"
setting to something higher.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D152918
This adds a new command that will show all the information lldb
knows about a register.
```
(lldb) register info s0
Name: s0
Size: 4 bytes (32 bits)
Invalidates: v0, d0
Read from: v0
In sets: Floating Point Registers (index 1)
```
Currently it only allows a single register, and we get the
information from the RegisterInfo structure.
For those of us who know the architecture well, this information
is all pretty obvious. For those who don't, it's nice to have it
at a glance without leaving the debugger.
I hope to have more in depth information to show here in the future,
which will be of wider use.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D152916
This register is used as the pointer to the current thread
local storage block and is read from NT_ARM_TLS on Linux.
Though tpidr will be present on all AArch64 Linux, I am soon
going to add a second register tpidr2 to this set.
tpidr is only present when SME is implemented, therefore the
NT_ARM_TLS set will change size. This is why I've added this
as a dynamic register set to save changes later.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D152516
This patch should address the failure of TestStackCoreScriptedProcess
that is happening specifically on x86_64.
It turns out that in 1370a1cb5b, I changed the way we extract integers
from a `StructuredData::Dictionary` and in order to get a stop info from
the scripted process, we call a method that returns a `SBStructuredData`
containing the stop reason data.
TestStackCoreScriptedProcess` was failing specifically on x86_64 because
the stop info dictionary contains the signal number, that the `Scripted
Thread` was trying to extract as a signed integer where it was actually
parsed as an unsigned integer. That caused `GetValueForKeyAsInteger` to
return the default value parameter, `LLDB_INVALID_SIGNAL_NUMBER`.
This patch address the issue by extracting the signal number with the
appropriate type and re-enables the test.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
When formatting a variable, the max depth would potentially be ignored
if the current value object failed to print itself. Change that to
always respect the max depth, even if failure occurs.
rdar://109855463
Differential Revision: https://reviews.llvm.org/D152409
Currently the expression parser prints a mostly useless generic error before printing the compiler error:
(lldb) p 1+x)
error: expression failed to parse:
error: <user expression 18>:1:3: use of undeclared identifier 'x'
1+x)
^
This is distracting and as far as I can tell only exists to work
around the fact that the first "error: " is unconditionally injected
by CommandReturnObject. The solution is not very elegant, but the
result looks much better.
(Partially addresses rdar://110492710)
Differential Revision: https://reviews.llvm.org/D152590
The `target.max-children-depth` setting and `--depth` flag would be
ignored if treating pointer as arrays, fix that by always incrementing
the current depth when printing a new child.
rdar://109855463
Differential Revision: https://reviews.llvm.org/D151950
This patch skips both `test_completion_target_create_from_root_dir`
introduced in `e896612` and `target-label.test` introduced in `1e82b20`
since I don't have a windows machine to try to accomodate the filesystem
path style differences for these tests to pass.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch should fix path completion starting from the root directory.
To do so, this patch adds a special case when setting the search
directory when the completion buffer points to the root directory.
Differential Revision: https://reviews.llvm.org/D152013
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch should allow the user to set specific auto-completion type
for their custom commands.
To do so, we had to hoist the `CompletionType` enum so the user can
access it and add a new completion type flag to the CommandScriptAdd
Command Object.
So now, the user can specify which completion type will be used with
their custom command, when they register it.
This also makes the `crashlog` custom commands use disk-file completion
type, to browse through the user file system and load the report.
Differential Revision: https://reviews.llvm.org/D152011
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
I fixed some long-standing failures in SBTarget::FindGlobalVariables
but the fix is in the the accelerator table lookups. I fixed it in
the DWARF mappable tables but not everyone uses those, so I had to
restrict the test to systems I know did.
There were two bugs here.
eMatchTypeStartsWith searched for "symbol_name" by adding ".*" to the
end of the symbol name and treating that as a regex, which isn't
actually a regex for "starts with". The ".*" is in fact a no-op. When
we finally get to comparing the name, we compare against whatever form
of the name was in the accelerator table. But for C++ that might be
the mangled name. We should also try demangled names here, since most
users are going the see demangled not mangled names. I fixed these
two bugs and added a bunch of tests for FindGlobalVariables.
This change is in the DWARF parser code, so there may be a similar bug
in PDB, but the test for this was already skipped for Windows, so I
don't know about this.
You might theoretically need to do this Mangled comparison in
DWARFMappedHash::MemoryTable::FindByName
except when we have names we always chop them before looking them up
so I couldn't see any code paths that fail without that change. So I
didn't add that to this patch.
Differential Revision: https://reviews.llvm.org/D151940
Show line numbers to the left of diagnostic code snippets and increase
the numbers of lines shown from 1 to 16.
Differential Revision: https://reviews.llvm.org/D147875
This was just a thinko. The API StackFrame::GetVariableList takes a
bool for "get_file_globals" which if true will also find file statics
and file globals. But we only were passing that as true if the
ValueType was eValueTypeVariableGlobal, which meant that we never find
file statics. It's okay if we cast too wide a net when we do
GetVariableList as later on we check against the ValueType to filter
globals from statics.
There was a test that had a whole bunch of globals and tested
FindValue on all of them, but had no statics. So I just made one of
the globals a file static, which verifies the fix.
Differential Revision: https://reviews.llvm.org/D151392
Expression evaluation for `void` valued expressions sets an error using the `kNoResult`
code. Like the `expression` command, `dwim-print` should also not print such errors.
Before:
```
(lldb) dwim-print (void)printf("hi\n")
hi
Error: 'unknown error'
```
After:
```
(lldb) dwim-print (void)printf("hi\n")
hi
```
rdar://109746544
Differential Revision: https://reviews.llvm.org/D151351
When printing the root of a value, if it's a reference its children are unconditionally
printed - in contrast to pointers whose children are only printed if a sufficient
pointer depth is given.
However, the children are printed even when there's a summary provider that says not to.
If a summary provider exists, this change consults it to determine if children should be
printed.
For example, given a variable of type `std::string &`, this change has the following
effect:
Before:
```
(lldb) p string_ref
(std::string &) string_ref = "one two three four five six seven eight nine ten": {
__r_ = {
std::__1::__compressed_pair_elem<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >::__rep, 0, false> = {
__value_ = {
= {
__l = (__data_ = "one two three four five six seven eight nine ten", __size_ = 48, __cap_ = 64, __is_long_ = 1)
__s = (__data_ = "@\0p\U00000001\0`\0\00\0\0\0\0\0\0\0@", __padding_ = "\x80t<", __size_ = '\0', __is_long_ = '\x01')
__r = {
__words ={...}
}
}
}
}
}
}
```
After:
```
(lldb) p string_ref
(std::string &) string_ref = "one two three four five six seven eight nine ten"
```
rdar://73248786
Differential Revision: https://reviews.llvm.org/D151748
Since 44bb442 LLDB TestVarPath.py crashes on AArch64 Windows.
GetValueForVariablePath function seems to be triggering the crash.
This patch disable parts of this test causing the crash.
Bug reported upstream:
https://github.com/llvm/llvm-project/issues/62983
