This fixes bad behavior of that class that surfaced in
https://reviews.llvm.org/D154299, where calling applySignatureConversion
left the insertion point different from before the call, which broke a
subsequent call to replaceOp. This patch introduces a fix in both
functions, each of which is enough to fix the specific problem in the
aforementioned diff: (1) applySignatureConversion now resets the
insertion point with a guard for the whole function and (2) replace sets
the insertion point to the op that should be replaced (and resets it
with a guard).
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D154684
* All IR modifications are done with a rewriter.
* The new C++ entry point takes a `RewriterBase &`, which may have a listener attached to it.
This revision is useful because it allows users to run CSE and track IR modifications via a listener that can be attached to the rewriter.
This is a reupload. The original CL was reverted (9979417d4d) due to a memory leak. The memory leak is unrelated to this change and fixed with D154185.
Differential Revision: https://reviews.llvm.org/D145226
Add an additional entry point so that CSE can be used without a pass. This allows CSE to be used from the Transform dialect without invalidating all handles.
* All IR modifications are done with a rewriter.
* The C++ entry point takes a `RewriterBase &`, which may have a listener attached to it. This allows users to track all IR modifications.
Differential Revision: https://reviews.llvm.org/D145226
This allows users of `applyPatternsAndFoldGreedily` to detect if any MLIR changes have occurred. An example use-case is where we expect the `applyPatternsAndFoldGreedily` to change the IR and want to validate that it indeed does change it.
Differential Revision: https://reviews.llvm.org/D153986
This revision introduces support for memset intrinsics in SROA and
mem2reg for the LLVM dialect. This is achieved for SROA by breaking
memsets of aggregates into multiple memsets of scalars, and for mem2reg
by promoting memsets of single integer slots into the value the memset
operation would yield.
The SROA logic supports breaking memsets of static size operating at the
start of a memory slot. The intended most common case is for memsets
covering the entirety of a struct, most often as a way to initialize it
to 0.
The mem2reg logic supports dynamic values and static sizes as input to
promotable memsets. This is achieved by lowering memsets into
`ceil(log_2(n))` LeftShift operations, `ceil(log_2(n))` Or operations
and up to one ZExt operation (for n the byte width of the integer),
computing in registers the integer value the memset would create. Only
byte-aligned integers are supported, more types could easily be added
afterwards.
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D152367
`RewriterBase::Listener::notifyOperationReplaced` notifies observers that an op is about to be replaced with a range of values. This notification is not very useful for ops without results, because it does not specify the replacement op (and it cannot be deduced from the replacement values). It provides no additional information over the `notifyOperationRemoved` notification.
This revision adds an additional notification when a rewriter replaces an op with another op. By default, this notification triggers the original "op replaced with values" notification, so there is no functional change for existing code.
This new API is useful for the transform dialect, which needs to track op replacements. (Updated in a subsequent revision.)
Also includes minor documentation improvements.
Differential Revision: https://reviews.llvm.org/D152814
Instead of always taking the last op from the worklist, take a random one. For testing/debugging purposes only. This feature can be used to ensure that lowering pipelines work correctly regardless of the order in which ops are processed by the GreedyPatternRewriteDriver.
The randomizer can be enabled by setting a numeric `MLIR_GREEDY_REWRITE_RANDOMIZER_SEED` option.
Note: When enabled, 27 tests are currently failing. Partly because FileCheck tests are looking for exact IR.
Discussion: https://discourse.llvm.org/t/discussion-fuzzing-pattern-application/67911
Differential Revision: https://reviews.llvm.org/D142447
The MLIR classes Type/Attribute/Operation/Op/Value support
cast/dyn_cast/isa/dyn_cast_or_null functionality through llvm's doCast
functionality in addition to defining methods with the same name.
This change begins the migration of uses of the method to the
corresponding function call as has been decided as more consistent.
Note that there still exist classes that only define methods directly,
such as AffineExpr, and this does not include work currently to support
a functional cast/isa call.
Context:
- https://mlir.llvm.org/deprecation/ at "Use the free function variants
for dyn_cast/cast/isa/…"
- Original discussion at https://discourse.llvm.org/t/preferred-casting-style-going-forward/68443
Implementation:
This patch updates all remaining uses of the deprecated functionality in
mlir/. This was done with clang-tidy as described below and further
modifications to GPUBase.td and OpenMPOpsInterfaces.td.
Steps are described per line, as comments are removed by git:
0. Retrieve the change from the following to build clang-tidy with an
additional check:
main...tpopp:llvm-project:tidy-cast-check
1. Build clang-tidy
2. Run clang-tidy over your entire codebase while disabling all checks
and enabling the one relevant one. Run on all header files also.
3. Delete .inc files that were also modified, so the next build rebuilds
them to a pure state.
```
ninja -C $BUILD_DIR clang-tidy
run-clang-tidy -clang-tidy-binary=$BUILD_DIR/bin/clang-tidy -checks='-*,misc-cast-functions'\
-header-filter=mlir/ mlir/* -fix
rm -rf $BUILD_DIR/tools/mlir/**/*.inc
```
Differential Revision: https://reviews.llvm.org/D151542
Encapsulate all worklist-related functionality in a separate `Worklist` class. This makes the remaining code more readable and allows for custom worklist implementations (e.g., a randomized worklist for fuzzing pattern application: D142447).
Differential Revision: https://reviews.llvm.org/D151345
Boolean compiler flags (such as `DMLIR_ENABLE_EXPENSIVE_PATTERN_API_CHECKS`) show up in `mlir-config.h` as preprocessor defines that are either 0 or 1. Use `#if` instead of `#ifdef`.
This should have been part of D144552.
Compute operation finger prints to detect incorrect API usage in RewritePatterns. Does not work for dialect conversion patterns.
Detect patterns that:
* Returned `failure` but changed the IR.
* Returned `success` but did not change the IR.
* Inserted/removed/modified ops, bypassing the rewriter. Not all cases are detected.
These new checks are quite expensive, so they are only enabled with `-DMLIR_ENABLE_EXPENSIVE_PATTERN_API_CHECKS=ON`. Failures manifest as fatal errors (`llvm::report_fatal_error`) or crashes (accessing deallocated memory). To get better debugging information, run `mlir-opt -debug` (to see which pattern is broken) with ASAN (to see where memory was deallocated).
Differential Revision: https://reviews.llvm.org/D144552
This revision introduces a generic implementation of Scalar Replacement
Of Aggregates. In contrast to the implementation in LLVM, this focuses
on the core of SROA: destructuring aggregates. By implementing
interfaces on allocators and accessors, memory allocators can be
destructured into smaller allocators, through the MemorySlot
abstraction.
This pass only works on aggregates that are accessed in a "type-safe"
way, that is within the bounds and respecting the type of a given memory
slot. The destructuring pattern and functions only peel off the first
layer of aggregates and can safely be applied repeatedly. For
convenience, the transformation is also available as a pass that will
apply the pattern repeatedly.
Depends on D149958
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D150186
This revision modifies the mem2reg interfaces and algorithm to be more
omfortable to use as a pattern. The motivation behind this is that
currently the pattern needs to be applied to the scope op of the region
in which allocators should be promoted. However, a more natural way to
apply the pattern would be to apply it on the allocator directly. This
is not only clearer but easier to parallelize.
This revision changes the mem2reg pattern to operate this way. This
required restraining the interfaces to only mutate IR using
RewriterBase, as the previously used escape hatch is not granular enough
to match on the region that is modified only. This has the unfortunate
cost of preventing batching allocator promotion and making the block
argument adding logic more complex. Because batching no longer made any
sense, I made the internal analyzer/promoter decoupling private again.
This also adds statistics to the mem2reg infrastructure.
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D150432
The MLIR classes Type/Attribute/Operation/Op/Value support
cast/dyn_cast/isa/dyn_cast_or_null functionality through llvm's doCast
functionality in addition to defining methods with the same name.
This change begins the migration of uses of the method to the
corresponding function call as has been decided as more consistent.
Note that there still exist classes that only define methods directly,
such as AffineExpr, and this does not include work currently to support
a functional cast/isa call.
Caveats include:
- This clang-tidy script probably has more problems.
- This only touches C++ code, so nothing that is being generated.
Context:
- https://mlir.llvm.org/deprecation/ at "Use the free function variants
for dyn_cast/cast/isa/…"
- Original discussion at https://discourse.llvm.org/t/preferred-casting-style-going-forward/68443
Implementation:
This first patch was created with the following steps. The intention is
to only do automated changes at first, so I waste less time if it's
reverted, and so the first mass change is more clear as an example to
other teams that will need to follow similar steps.
Steps are described per line, as comments are removed by git:
0. Retrieve the change from the following to build clang-tidy with an
additional check:
https://github.com/llvm/llvm-project/compare/main...tpopp:llvm-project:tidy-cast-check
1. Build clang-tidy
2. Run clang-tidy over your entire codebase while disabling all checks
and enabling the one relevant one. Run on all header files also.
3. Delete .inc files that were also modified, so the next build rebuilds
them to a pure state.
4. Some changes have been deleted for the following reasons:
- Some files had a variable also named cast
- Some files had not included a header file that defines the cast
functions
- Some files are definitions of the classes that have the casting
methods, so the code still refers to the method instead of the
function without adding a prefix or removing the method declaration
at the same time.
```
ninja -C $BUILD_DIR clang-tidy
run-clang-tidy -clang-tidy-binary=$BUILD_DIR/bin/clang-tidy -checks='-*,misc-cast-functions'\
-header-filter=mlir/ mlir/* -fix
rm -rf $BUILD_DIR/tools/mlir/**/*.inc
git restore mlir/lib/IR mlir/lib/Dialect/DLTI/DLTI.cpp\
mlir/lib/Dialect/Complex/IR/ComplexDialect.cpp\
mlir/lib/**/IR/\
mlir/lib/Dialect/SparseTensor/Transforms/SparseVectorization.cpp\
mlir/lib/Dialect/Vector/Transforms/LowerVectorMultiReduction.cpp\
mlir/test/lib/Dialect/Test/TestTypes.cpp\
mlir/test/lib/Dialect/Transform/TestTransformDialectExtension.cpp\
mlir/test/lib/Dialect/Test/TestAttributes.cpp\
mlir/unittests/TableGen/EnumsGenTest.cpp\
mlir/test/python/lib/PythonTestCAPI.cpp\
mlir/include/mlir/IR/
```
Differential Revision: https://reviews.llvm.org/D150123
This revision introduces the ability to invoke mem2reg as a rewrite pattern. This also modified the canonical mem2reg pass to use the rewrite pattern approach.
Depends on D149825
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D149958
This patch refactors the Mem2Reg infrastructure. It decouples
analysis from promotion, allowing for more control over the execution of
the logic. It also adjusts the interfaces to be less coupled to mem2reg
and more general. This will be useful for an upcoming revision
introducing generic SROA.
This commit reverts f333977eb2 and relands 91cff8a718.
The original commit was reverted accidentally due to a misinterpretation
of a bazel build bot failure.
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D149825
This patch refactors the Mem2Reg infrastructure. It decouples
analysis from promotion, allowing for more control over the execution of
the logic. It also adjusts the interfaces to be less coupled to mem2reg
and more general. This will be useful for an upcoming revision
introducing generic SROA.
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D149825
This patch introduces a generic implementation of mem2reg on
unstructured control-flow, along with a specialization for LLVM IR. This
is achieved by defining three new interfaces, representing 1. allocating
operations, 2. operations doing memory accesses, 3. operations that can
be rewired and/or deleted to stop using a specific use.
The file containing the core implementation of the algorithm
(`Mem2Reg.cpp`) contains a detailed explanation of how the algorithm
works. The contract for this pass is that given a memory slot with a
single non-aliased pointer, the pass will either remove all the uses of
the pointer or not change anything.
To help review this patch, I recommend starting by looking at the
interfaces defined in `Mem2Reg.td`, along with their reference
implementation for LLVM IR defined in `LLVMMem2Reg.cpp`. Then, the core
algorithm is implemented in `Mem2Reg.cpp`.
If this is all good I also have an implementation of the interfaces for
0-dimensional memref promotion that I can upstream afterwards.
Reviewed By: gysit
Differential Revision: https://reviews.llvm.org/D148109
Currently conversions to interfaces may happen implicitly (e.g.
`Attribute -> TypedAttr`), failing a runtime assert if the interface
isn't actually implemented. This change marks the `Interface(ValueT)`
constructor as explicit so that a cast is required.
Where it was straightforward to I adjusted code to not require casts,
otherwise I just made them explicit.
Depends on D148491, D148492
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D148493
This allows implicit conversion from `ElementsAttr` to `TypedAttr`, but
required renaming the `ElementsAttr::getType()` interface method to
`getShapedType`.
Reviewed By: rriddle
Differential Revision: https://reviews.llvm.org/D148492
The utility functions takes a region and makes it isolated from above
by appending to the entry block arguments that represent the captured
values and replacing all uses of the captured values within the region
with the newly added arguments. The captures values are returned.
The utility function also takes an optional callback that allows
cloning operations that define the captured values into the region
during the process of making it isolated from above. The cloned value
is no longer a captured values. The operands of the operation are then
captured values. This is done transitively allow cloning of a DAG of
operations into the region based on the callback.
Reviewed By: jpienaar
Differential Revision: https://reviews.llvm.org/D148684
The revision ensures the newly introduced argument
and result handlers cannot be used for type conversion.
Instead use the existing materializeCallConversion hook to
perform type conversions.
Reviewed By: Dinistro
Differential Revision: https://reviews.llvm.org/D147605
The current dialect conversion does not support 1:N type conversions.
This commit implements a (poor-man's) dialect conversion pass that does
just that. To keep the pass independent of the "real" dialect conversion
infrastructure, it provides a specialization of the TypeConverter class
that allows for N:1 target materializations, a specialization of the
RewritePattern and PatternRewriter classes that automatically add
appropriate unrealized casts supporting 1:N type conversions and provide
converted operands for implementing subclasses, and a conversion driver
that applies the provided patterns and replaces the unrealized casts
that haven't folded away with user-provided materializations.
The current pass is powerful enough to express many existing manual
solutions for 1:N type conversions or extend transforms that previously
didn't support them, out of which this patch implements call graph type
decomposition (which is currently implemented with a ValueDecomposer
that is only used there).
The goal of this pass is to illustrate the effect that 1:N type
conversions could have, gain experience in how patterns should be
written that achieve that effect, and get feedback on how the APIs of
the dialect conversion should be extended or changed to support such
patterns. The hope is that the "real" dialect conversion eventually
supports such patterns, at which point, this pass could be removed
again.
Reviewed By: springerm
Differential Revision: https://reviews.llvm.org/D144469
The current dialect conversion does not support 1:N type conversions.
This commit implements a (poor-man's) dialect conversion pass that does
just that. To keep the pass independent of the "real" dialect conversion
infrastructure, it provides a specialization of the TypeConverter class
that allows for N:1 target materializations, a specialization of the
RewritePattern and PatternRewriter classes that automatically add
appropriate unrealized casts supporting 1:N type conversions and provide
converted operands for implementing subclasses, and a conversion driver
that applies the provided patterns and replaces the unrealized casts
that haven't folded away with user-provided materializations.
The current pass is powerful enough to express many existing manual
solutions for 1:N type conversions or extend transforms that previously
didn't support them, out of which this patch implements call graph type
decomposition (which is currently implemented with a ValueDecomposer
that is only used there).
The goal of this pass is to illustrate the effect that 1:N type
conversions could have, gain experience in how patterns should be
written that achieve that effect, and get feedback on how the APIs of
the dialect conversion should be extended or changed to support such
patterns. The hope is that the "real" dialect conversion eventually
supports such patterns, at which point, this pass could be removed
again.
Reviewed By: springerm
Differential Revision: https://reviews.llvm.org/D144469
The constructor of `OperationFolder` takes a listener. Therefore, the remaining API should not take any builder/rewriters. This could lead to double notifications in case a listener is attached to the builder/rewriter.
As an internal cleanup, `OperationFolder` now has an `IRRewriter` instead of a `RewriterBase::Listener`. In most cases, `OperationFolder` no longer has to notify/deal with listeners. This is done by the rewriter.
Differential Revision: https://reviews.llvm.org/D146134
The revision adds the handleArgument and handleResult handlers that
allow users of the inlining interface to implement argument and result
conversions that take argument and result attributes into account. The
motivating use cases for this revision are taken from the LLVM dialect
inliner, which has to copy arguments that are marked as byval and that
also has to consider zeroext / signext when converting integers.
All type conversions are currently handled by the
materializeCallConversion hook. It runs before isLegalToInline and
supports only the introduction of a single cast operation since it may
have to rollback. The new handlers run shortly before and after
inlining and cannot fail. As a result, they can introduce more complex
ir such as copying a struct argument. At the moment, the new hooks
cannot be used to perform type conversions since all type conversions
have to be done using the materializeCallConversion. A follow up
revision will either relax this constraint or drop
materializeCallConversion in favor of the new and more flexible
handlers.
The revision also extends the CallableOpInterface to provide access
to the argument and result attributes if available.
Reviewed By: rriddle, Dinistro
Differential Revision: https://reviews.llvm.org/D145582
Replace references to enumerate results with either result_pairs
(reference wrapper type) or structured bindings. I did not use
structured bindings everywhere as it wasn't clear to me it would
improve readability.
This is in preparation to the switch to zip semantics which won't
support non-const lvalue reference to elements:
https://reviews.llvm.org/D144503.
I chose to use values instead of const lvalue-refs because MLIR is
biased towards avoiding `const` local variables. This won't degrade
performance because currently `result_pair` is cheap to copy (size_t
+ iterator), and in the future, the enumerator iterator dereference
will return temporaries anyway.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D146006
This iterator is similar to `ForwardIterator` but enumerates blocks according to their successor relationship. As a first use case, this new iterator is utilized in the dialect conversion framework.
Differential Revision: https://reviews.llvm.org/D144888
* `RewriterBase::mergeBlocks` is simplified: it is implemented in terms of `mergeBlockBefore`.
* The signature of `mergeBlockBefore` is consistent with other API (such as `inlineRegionBefore`): an overload for a `Block::iterator` is added.
* Additional safety checks are added to `mergeBlockBefore`: detect cases where the resulting IR could be invalid (no more `dropAllUses`) or partly unreachable (likely a case of incorrect API usage).
* Rename `mergeBlockBefore` to `inlineBlockBefore`.
Differential Revision: https://reviews.llvm.org/D144969
Add pass to print the entire IR on the debug stream.
This is meant for debugging purposes to inspect the IR at a specific point in the pipeline.
Differential Revision: https://reviews.llvm.org/D144918
Remove the IR modification callbacks from `OperationFolder`. Instead, an optional `RewriterBase::Listener` can be specified.
* `processGeneratedConstants` => `notifyOperationCreated`
* `preReplaceAction` => `notifyOperationReplaced`
This simplifies the GreedyPatternRewriterDriver because we no longer need special handling for IR modifications due to op folding.
A folded operation is now enqueued on the GreedyPatternRewriteDriver's worklist if it was modified in-place. (There may be new patterns that apply after folding.)
Also fixes a bug in `TestOpInPlaceFold::fold`. The folder could previously be applied over and over and did not return a "null" OpFoldResult if the IR was not modified. (This is similar to a pattern that returns `success` without modifying IR; it can trigger an infinite loop in the GreedyPatternRewriteDriver.)
Differential Revision: https://reviews.llvm.org/D144463
This callback is triggered by `finalizeRootUpdate`. This allows listeners to listen for in-place op modifications without creating a new RewriterBase subclass.
Differential Revision: https://reviews.llvm.org/D143380
Allow an optional `RewriterBase::Listener` to be attached to greedy pattern rewrites, so that clients can listen for IR modifications.
Differential Revision: https://reviews.llvm.org/D143340
```
OpBuilder OpBuilder::Listener
^ ^
| |
RewriterBase RewriterBase::Listener
```
* Clients can listen to IR modifications with `RewriterBase::Listener`.
* `RewriterBase` no longer inherits from `OpBuilder::Listener`.
* Only a single listener can be registered at the moment (same as `OpBuilder`).
RFC: https://discourse.llvm.org/t/rfc-listeners-for-rewriterbase/68198
Differential Revision: https://reviews.llvm.org/D143339
Add replaceUsesWithIf on Operation along the lines of
Value::replaceUsesWithIf. This had been missing on Operation and is
convenient to replace multi-result operations' results conditionally.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D144348
Remapping memory spaces is a function often needed in type
conversions, most often when going to LLVM or to/from SPIR-V (a future
commit), and it is possible that such remappings may become more
common in the future as dialects take advantage of the more generic
memory space infrastructure.
Currently, memory space remappings are handled by running a
special-purpose conversion pass before the main conversion that
changes the address space attributes. In this commit, this approach is
replaced by adding a notion of type attribute conversions
TypeConverter, which is then used to convert memory space attributes.
Then, we use this infrastructure throughout the *ToLLVM conversions.
This has the advantage of loosing the requirements on the inputs to
those passes from "all address spaces must be integers" to "all
memory spaces must be convertible to integer spaces", a looser
requirement that reduces the coupling between portions of MLIR.
ON top of that, this change leads to the removal of most of the calls
to getMemorySpaceAsInt(), bringing us closer to removing it.
(A rework of the SPIR-V conversions to use this new system will be in
a folowup commit.)
As a note, one long-term motivation for this change is that I would
eventually like to add an allocaMemorySpace key to MLIR data layouts
and then call getMemRefAddressSpace(allocaMemorySpace) in the
relevant *ToLLVM in order to ensure all alloca()s, whether incoming or
produces during the LLVM lowering, have the correct address space for
a given target.
I expect that the type attribute conversion system may be useful in
other contexts.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D142159
Top-level ModuleOps cannot be transformed with the GreedyPatternRewriteDriver since D141945 because they do not have an enclosing region that could be used as a scope. Make the scope optional inside GreedyPatternRewriteDriver, so that top-level ops can be processed when they are on the initial list of ops.
Note: This does not allow users to bypass the scoping mechanism by setting `config.scope = nullptr`.
Fixes#60462.
Differential Revision: https://reviews.llvm.org/D143151
