So far, the test case was also testing the offset -1. This test cases
failed if the string is immediately at the beginning of the memory
region, though, and the offset -1 hence belonged to a different memory
region.
The fix is rather straightforward:
Passing an offset of -1 is not used by any actual clients of lldb-dap,
anyway. As such, this commit simply removes the corresponding test case.
Implement operators `<=` and `>=` to explicitly check the comparison
results to be `cmpLessThan` or `cmpEqual` instead of negating the result
of `operators<`.
Fixes#85947
This isn't strictly a Windows issue but for now it's the only bot
that was hit by this failure.
It can happen on Linux too but I expect we'll fix it and remove the
skip soon anyway.
Test was added in #104317.
This commit implements support for the "declaration location" recently
added by microsoft/debug-adapter-protocol#494 to the debug adapter
protocol.
For the `declarationLocationReference` we need a variable ID similar to
the `variablesReference`. I decided to simply reuse the
`variablesReference` here and renamed `Variables::expandable_variables`
and friends accordingly. Given that almost all variables have a
declaration location, we now assign those variable ids to all variables.
While `declarationLocationReference` effectively supersedes
`$__lldb_extensions.declaration`, I did not remove this extension, yet,
since I assume that there are some closed-source extensions which rely
on it.
I tested this against VS-Code Insiders. However, VS-Code Insiders
currently only supports `valueLoctionReference` and not
`declarationLocationReference`, yet. Locally, I hence published the
declaration locations as value locations, and VS Code Insiders navigated
to the expected places. Looking forward to proper VS Code support for
`declarationLocationReference`.
Add support for the `readMemory` request which allows VS-Code to
inspect memory. Also, add `memoryReference` to variables and `evaluate`
responses, such that the binary view can be opened from the variables
view and from the "watch" pane.
These benchmarks don't get run as part of the regular API test-suite.
And I'm not aware of any CI running this. Also, I haven't quite managed
to actually run them locally using the `bench.py` script. It looks like
these are obsolete, so I'm proposing to remove the infrastructure around
it entirely.
If anyone does know of a use for these do let me know.
This patch is in preparation for the `__compressed_pair` refactor in
https://github.com/llvm/llvm-project/pull/76756.
This is mostly reviewable now. With the new layout we no longer need to
unwrap the `__compressed_pair`. Instead, we just need to look for child
members. E.g., to get to the underlying pointer of `std::unique_ptr` we
no longer do,
```
GetFirstValueOfCXXCompressedPair(GetChildMemberWithName("__ptr_"))
```
but instead do
```
GetChildMemberWithName("__ptr_")
```
We need to be slightly careful because previously the
`__compressed_pair` had a member called `__value_`, whereas now
`__value_` might be a member of the class that used to hold the
`__compressed_pair`. So before unwrapping the pair, we added checks for
`isOldCompressedLayout` (not sure yet whether folding this check into
`GetFirstValueOfCXXCompressedPair` is better).
In #95312 Minidump file creation was moved from being created at the
end, to the file being emitted in chunks. This causes some undesirable
behavior where the file can still be present after an error has
occurred. To resolve this we will now delete the file upon an error.
IIUC, the history of `std::string`'s `__short` structure in the
alternate ABI layout (as recorded by the simulator test) looks as
follows:
* First layout ( `SUBCLASS_PADDING` is defined):
```
struct __short
{
value_type __data_[__min_cap];
struct
: __padding<value_type>
{
unsigned char __size_;
};
};
```
* Then:
```
struct __short
{
value_type __data_[__min_cap];
unsigned char __padding[sizeof(value_type) - 1];
unsigned char __size_;
};
```
* Then, post-`BITMASKS`:
```
struct __short
{
value_type __data_[__min_cap];
unsigned char __padding[sizeof(value_type) - 1];
unsigned char __size_ : 7;
unsigned char __is_long_ : 1;
};
```
Which is the one that's [on
top-of-tree](89c10e27d8/libcxx/include/string (L854-L859)).
But for `REVISION > 1`, `BITMASKS` is never set, so for those tests we
lose the `__padding` member.
This patch fixes this by splitting out the `SUBCLASS_PADDING` out of the
ifdef.
Drive-by:
* Also run expression evaluator on the string to provide is with some
extra coverage.
The test failed in
<https://lab.llvm.org/buildbot/#/builders/162/builds/5785> due to frame
variable not being in stop commands, even though the DAP log shows the
command being present there. I'm pretty sure this is a race in the test
the collection of the test log. I fix that by making sure we wait for
the expected output, and also by increasing the timeout (1s is cutting
it very close).
The arm failure link is no longer functional, but I'm fairly certain
that this was the cause of those flakes as well.
Recently in #107731 this change was revereted due to excess memory size
in `TestSkinnyCore`. This was due to a bug where a range's end was being
passed as size. Creating massive memory ranges.
Additionally, and requiring additional review, I added more unit tests
and more verbose logic to the merging of save core memory regions.
@jasonmolenda as an FYI.
This fix is based on a problem with cxx_compiler and cxx_linker macros
on Windows.
There was an issue with compiler detection in paths containing "icc". In
such case, Makefile.rules thought it was provided with icc compiler.
To solve that, utilities detection has been rewritten in Python.
The last element of compiler's path is separated, taking into account
the platform path delimiter, and compiler type is extracted, with regard
of possible cross-toolchain prefix.
---------
Co-authored-by: Pavel Labath <pavel@labath.sk>
Follow up to #102708, the tests are failing for windows. There is a
large variance in these tests between summary strings and built in
types. I'm disabling these test for windows, and will add windows
specific tests as a follow up to this.
Refactoring `stackTrace` to perform frame look ups in a more on-demand
fashion to improve overall performance.
Additionally adding additional information to the `exceptionInfo`
request to report exception stacks there instead of merging the
exception stack into the stack trace. The `exceptionInfo` request is
only called if a stop event occurs with `reason='exception'`, which
should mitigate the performance of `SBThread::GetCurrentException`
calls.
Adding unit tests for exception handling and stack trace supporting.
This PR adds a statistics provider cache, which allows an individual
target to keep a rolling tally of it's total time and number of
invocations for a given summary provider. This information is then
available in statistics dump to help slow summary providers, and gleam
more into insight into LLDB's time use.
Currently, LLDB assumes all minidumps will have unique sections. This is
intuitive because almost all of the minidump sections are themselves
lists. Exceptions including Signals are unique in that they are all
individual sections with their own directory.
This means LLDB fails to load minidumps with multiple exceptions due to
them not being unique. This behavior is erroneous and this PR introduces
support for an arbitrary number of exception streams. Additionally, stop
info was calculated only for a single thread before, and now we properly
support mapping exceptions to threads.
~~This PR is starting in DRAFT because implementing testing is still
required.~~
This is a revert of b1fcc1840c.
These tests weren't working on Ubuntu 22.04 or Fedora 37-40. I'm not
sure exactly why, but it seems like they may be incompatible with
libstdc++. Also, despite the fact that the tests were using the system
libstdc++, the tests were only run when libcxx was enabled.
I tested this with a RelWithDebInfo build and the tests passed.
Fixes#106475
Reapplies #106293, testing identified issue in the merging code. I used
this opportunity to strip CoreFileMemoryRanges to it's own file and then
add unit tests on it's behavior.
A follow up to #106473 Minidump wasn't collecting fs or gs_base. This
patch extends the x86_64 register context and gated reading it behind an
lldb specific flag. Additionally these registers are explicitly checked
in the tests.
The PR adds the support optionally enabled/disabled FP-registers to LLDB
`RegisterInfoPOSIX_riscv64`. This situation might take place for RISC-V
builds having no FP-registers, like RV64IMAC or RV64IMACV.
To aim this, patch adds `opt_regsets` flags mechanism. It re-works
RegisterInfo class to work with flexibly allocated (depending on
`opt_regsets` flag) `m_register_sets` and `m_register_infos` vectors
instead of statically defined structures. The registration of regsets is
being arranged by `m_per_regset_regnum_range` map.
The patch flows are spread to `NativeRegisterContextLinux_riscv64` and
`RegisterContextCorePOSIX_riscv64` classes, that were tested on:
- x86_64 host working with coredumps
- RV64GC and RV64IMAC targets working with coredumps and natively in
run-time with binaries
`EmulateInstructionRISCV` is out of scope of this patch, and its
behavior did not change, using maximum set of registers.
According testcase built for RV64IMAC (no-FPR) was added to
`TestLinuxCore.py`.
This patch fixes an issue where the `memory find` command would
effectively stop searching after encountering a memory read error (which
could happen due to unreadable memory), without giving any indication
that it has done so (it would just print it could not find the pattern).
To make matters worse, it would not terminate after encountering this
error, but rather proceed to slowly increment the address pointer, which
meant that searching a large region could take a very long time (and
give the appearance that lldb is actually searching for the thing).
The patch fixes this first problem by detecting read errors and
skipping over (using GetMemoryRegionInfo) the unreadable parts of memory
and resuming the search after them. It also reads the memory in bulk
(`max(sizeof(pattern))`), which speeds up the search significantly (up
to 6x for live processes, 18x for core files).
`memory read` will return an error if you try to read more than 1k bytes
in a single command, instructing you to set
`target.max-memory-read-size` or use `--force` if you intended to read
more than that. This is a safeguard for a command where people are being
explicit about how much memory they would like lldb to read (either to
display, or save to a file) and is an annoyance every time you need to
read more than a small amount. If someone confuses the --count argument
with the start address, lldb may begin dumping gigabytes of data but I'd
rather that behavior than requiring everyone to special-case their way
around a common use case.
I don't want to remove the setting because many people have added (much
larger) default max read sizes to their ~/.lldbinit files after hitting
this behavior. Another option would be to stop reading/using the value
in Target.cpp, but I see no harm in leaving the setting if someone
really does prefer to have a small cap on their memory read size.
ReadProcessMemory will not perform the read if part of the memory is
unreadable (and even though the API has a `number_of_bytes_read`
argument). To make this work, I explicitly inspect the memory region
being read and only read the accessible part.
Previously, we were returning an error if we couldn't read the whole
region. This doesn't matter most of the time, because lldb caches memory
reads, and in that process it aligns them to cache line boundaries. As
(LLDB) cache lines are smaller than pages, the reads are unlikely to
cross page boundaries.
Nonetheless, this can cause a problem for large reads (which bypass the
cache), where we're unable to read anything even if just a single byte
of the memory is unreadable. This patch fixes the lldb-server to do
that, and also changes the linux implementation, to reuse any partial
results it got from the process_vm_readv call (to avoid having to
re-read everything again using ptrace, only to find that it stopped at
the same place).
This matches debugserver behavior. It is also consistent with the gdb
remote protocol documentation, but -- notably -- not with actual
gdbserver behavior (which returns errors instead of partial results). We
filed a
[clarification
bug](https://sourceware.org/bugzilla/show_bug.cgi?id=24751) several
years ago. Though we did not really reach a conclusion there, I think
this is the most logical behavior.
The associated test does not currently pass on windows, because the
windows memory read APIs don't support partial reads (I have a WIP patch
to work around that).
This patch extends TypeQuery matching to support anonymous namespaces. A
new flag is added to control the behavior. In the "strict" mode, the
query must match the type exactly -- all anonymous namespaces included.
The dynamic type resolver in the itanium abi (the motivating use case
for this) uses this flag, as it queries using the name from the
demangles, which includes anonymous namespaces.
This ensures we don't confuse a type with a same-named type in an
anonymous namespace. However, this does *not* ensure we don't confuse
two types in anonymous namespacs (in different CUs). To resolve this, we
would need to use a completely different lookup algorithm, which
probably also requires a DWARF extension.
In the "lax" mode (the default), the anonymous namespaces in the query
are optional, and this allows one search for the type using the usual
language rules (`::A` matches `::(anonymous namespace)::A`).
This patch also changes the type context computation algorithm in
DWARFDIE, so that it includes anonymous namespace information. This
causes a slight change in behavior: the algorithm previously stopped
computing the context after encountering an anonymous namespace, which
caused the outer namespaces to be ignored. This meant that a type like
`NS::(anonymous namespace)::A` would be (incorrectly) recognized as
`::A`). This can cause code depending on the old behavior to misbehave.
The fix is to specify all the enclosing namespaces in the query, or use
a non-exact match.
This patch addresses a bug where `cs`/`fs` and other segmentation flags
were being identified as having a type of `32b` and `64b` for `rflags`.
In that case the register value was returning the fail value `0xF...`
and this was corrupting some minidumps. Here we just read it as a 64b
value and truncate it.
In addition to that fix, I added comparing the registers from the live
process to the loaded core for the generic minidump test. Prior only
being ARM register tests. This explains why this was not detected
before.
At least for our Windows on Arm machine compiling with clang-cl,
it has inverted which variables get a `::` prefix.
Would not surprise me if msvc does the opposite so feel free to
revert if these tests fail for you.
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
With this commit, we also hide the implementation details of
`std::invoke`. To do so, the `LibCXXFrameRecognizer` got a couple more
regular expressions.
The regular expression passed into `AddRecognizer` became problematic,
as it was evaluated on the demangled name. Those names also included
result types for C++ symbols. For `std::__invoke` the return type is a
huge `decltype(...)`, making the regular expresison really hard to
write.
Instead, I added support to `AddRecognizer` for matching on the
demangled names without result type and argument types.
By hiding the implementation details of `invoke`, also the back traces
for `std::function` become even nicer, because `std::function` is using
`__invoke` internally.
Co-authored-by: Adrian Prantl <aprantl@apple.com>
This patch adds the option to specify specific memory ranges to be
included in a given core file. The current implementation lets user
specified ranges either be in addition to a certain save style, or
independent of them via the newly added custom enum.
To achieve being inclusive of save style, I've moved from a std::vector
of ranges to a RangeDataVector, and to join overlapping ranges to
prevent duplication of memory ranges in the core file.
As a non function bonus, when SBSavecore was initially created, the
header was included in the lldb-private interfaces, and I've fixed that
and moved it the forward declare as an oversight. CC @bulbazord in case
we need to include that into swift.
