Add statistics about the memory usage of the string pool. I'm
particularly interested in the memory used by the allocator, i.e. the
number of bytes actually used by the allocator it self as well as the
number of bytes allocated through the allocator.
Differential revision: https://reviews.llvm.org/D117914
This patch updates `dummy_scripted_process.py` to report the dummy
thread correctly to reflect the changes introduced by `d3e0f7e`.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds Exceptions to the list of supported stop reasons for
Scripted Threads.
The main motivation for this is that breakpoints are triggered as a
special exception class on ARM platforms, so adding it as a stop reason
allows the ScriptedProcess to selected the ScriptedThread that stopped at
a breakpoint (or crashed :p).
rdar://87430376
Differential Revision: https://reviews.llvm.org/D117074
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds support of multiple Scripted Threads in a ScriptedProcess.
This is done by fetching the Scripted Threads info dictionary at every
ScriptedProcess::DoUpdateThreadList and iterate over each element to
create a new ScriptedThread using the object instance, if it was not
already available.
This patch also adds the ability to pass a pointer of a script interpreter
object instance to initialize a ScriptedInterface instead of having to call
the script object initializer in the ScriptedInterface constructor.
This is used to instantiate the ScriptedThreadInterface from the
ScriptedThread constructor, to be able to perform call on that script
interpreter object instance.
Finally, the patch also updates the scripted process test to check for
multiple threads.
rdar://84507704
Differential Revision: https://reviews.llvm.org/D117071
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This removes the non-address bits before we try to use
the addresses.
Meaning that when results are shown, those results won't
show non-address bits either. This follows what "memory read"
has done. On the grounds that non-address bits are a property
of a pointer, not the memory pointed to.
I've added testing and merged the find and read tests into one
file.
Note that there are no API side changes because "memory find"
does not have an equivalent API call.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D117299
Allow users to create aliases for aliases to raw input commands. That probably
sounds convoluted, so here's an example:
```
command alias some-setup env SOMEVAR=SOMEVALUE
```
This an alias based on `env`, which itself is an alias for `_regex-env`.
`_regex-env` is a `command regex` command, which takes raw input.
The above `some-setup` alias fails with:
```
error: Unable to create requested alias.
```
This change allows such aliases to be created. lldb already supports aliases to
aliases for parsed commands.
Differential Revision: https://reviews.llvm.org/D117259
Although the memory tag commands use a memory tag manager to handle
addresses, that only removes the top byte.
That top byte is 4 bits of memory tag and 4 free bits, which is more
than it should strictly remove but that's how it is for now.
There are other non-address bit uses like pointer authentication.
To ensure the memory tag manager only has to deal with memory tags,
use the ABI plugin to remove the rest.
The tag access test has been updated to sign all the relevant pointers
and require that we're running on a system with pointer authentication
in addition to memory tagging.
The pointers will look like:
<4 bit user tag><4 bit memory tag><signature><bit virtual address>
Note that there is currently no API for reading memory tags. It will
also have to consider this when it arrives.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D117672
It complements the existing SBDebugger::SetCurrentPlatformSDKRoot and
allows one to set the sysroot of a platform without making it current.
Differential Revision: https://reviews.llvm.org/D117550
Provide minimal register definition defaults for working with servers
that implement neither target.xml nor qRegisterInfo packets. This is
useful e.g. when interacting with FreeBSD's kernel minimal gdbserver
that does not send target.xml but uses the same layout for its supported
register subset as GDB.
The prerequisite for this is the ability to determine the correct
architecture, e.g. from the target executable.
Differential Revision: https://reviews.llvm.org/D116896
This test for anonymous unions seems off. It tests the following:
```
union {
// fields
};
struct {
// fields
} var{...};
```
Both are anonymous types, but the first does not declare a variable and the
second one does. The test then checks that `frame var` can directly access the
fields of the anonymous union, but can't directly access the fields of the
anonymous struct variable.
The second test, to directly access the members of the struct variable, seems
pointless as similar code would not compile. A demonstration:
```
struct {
int a;
int z;
} a_z{23, 45};
printf("%d\n", a_z.a); // fine
printf("%d\n", a); // this does not compile
```
Since we can't directly access the fields in code, I'm not sure there's a
reason to test that lldb also can't directly access them (other than perhaps as
a regression test).
Differential Revision: https://reviews.llvm.org/D116863
When LLDB receives a SIGINT while running the embedded Python REPL it
currently just crashes in ScriptInterpreterPythonImpl::Interrupt with an
error such as the one below:
Fatal Python error: PyThreadState_Get: the function must be called
with the GIL held, but the GIL is released (the current Python thread
state is NULL)
The faulty code that causes this error is this part of
ScriptInterpreterPythonImpl::Interrupt:
PyThreadState *state = PyThreadState_GET();
if (!state)
state = GetThreadState();
if (state) {
long tid = state->thread_id;
PyThreadState_Swap(state);
int num_threads = PyThreadState_SetAsyncExc(tid, PyExc_KeyboardInterrupt);
The obvious fix I tried is to just acquire the GIL before this code is
running which fixes the crash but the KeyboardInterrupt we want to raise
immediately is actually just queued and would only be raised once the
next line of input has been parsed (which e.g. won't interrupt Python
code that is currently waiting on a timer or IO from what I can see).
Also none of the functions we call here is marked as safe to be called
from a signal handler from what I can see, so we might still end up
crashing here with some bad timing.
Python 3.2 introduced PyErr_SetInterrupt to solve this and the function
takes care of all the details and avoids doing anything that isn't safe
to do inside a signal handler. The only thing we need to do is to
manually setup our own fake SIGINT handler that behaves the same way as
the standalone Python REPL signal handler (which raises a
KeyboardInterrupt).
From what I understand the old code used to work with Python 2 so I kept
the old code around until we officially drop support for Python 2.
There is a small gap here with Python 3.0->3.1 where we might still be
crashing, but those versions have reached their EOL more than a decade
ago so I think we don't need to bother about them.
Differential revision: https://reviews.llvm.org/D104886
This was left over from when I had used some pointer authentication
instructions to sign the pointer. Then I realised that simply setting
the top byte is enough to prove the ABI plugin is being called.
Top byte ignore is a feature of the armv8-a architecure and doesn't
need any extra compiler flags.
Implement the qXfer:siginfo:read that is used to read the siginfo_t
(extended signal information) for the current thread. This is currently
implemented on FreeBSD and Linux.
Differential Revision: https://reviews.llvm.org/D117113
Due to a missing cast the << 60 always resulted in zero leaving
the top nibble empty. So we weren't actually testing that lldb
ignores those bits in addition to the tag bits.
Correct that and also set the top nibbles to ascending values
so that we can catch if lldb only removes one of the tag bits
and top nibble, but not both.
In future the tag manager will likely only remove the tag bits
and leave non-address bits to the ABI plugin but for now make
sure we're testing what we claim to implement.
"shell" is an alias to "platform shell -h --". Previously you would get this
help text:
(lldb) help shell
Run a shell command on the host. Expects 'raw' input (see 'help raw-input'.)
Syntax: shell <shell-command>
Command Options Usage:
'shell' is an abbreviation for 'platform shell -h --'
Since the code doesn't handle the base command having options
but the alias removing them. With these changes you get:
(lldb) help shell
Run a shell command on the host. Expects 'raw' input (see 'help raw-input'.)
Syntax: shell <shell-command>
'shell' is an abbreviation for 'platform shell -h --'
Note that we already handle a non-alias command having no options,
for example "quit":
(lldb) help quit
Quit the LLDB debugger.
Syntax: quit [exit-code]
Reviewed By: JDevlieghere, jingham
Differential Revision: https://reviews.llvm.org/D117004
Addresses on AArch64 can have top byte tags, memory tags and pointer
authentication signatures in the upper bits.
While testing memory tagging I found that memory read couldn't
read a range if the two addresses had different tags. The same
could apply to signed pointers given the right circumstance.
(lldb) memory read mte_buf_alt_tag mte_buf+16
error: end address (0x900fffff7ff8010) must be greater than the start
address (0xa00fffff7ff8000).
Or it would try to read a lot more memory than expected.
(lldb) memory read mte_buf mte_buf_alt_tag+16
error: Normally, 'memory read' will not read over 1024 bytes of data.
error: Please use --force to override this restriction just once.
error: or set target.max-memory-read-size if you will often need a
larger limit.
Fix this by removing non address bits before we calculate the read
range. A test is added for AArch64 Linux that confirms this by using
the top byte ignore feature.
This means that if you do read with a tagged pointer the output
does not include those tags. This is potentially confusing but I think
overall it's better that we don't pretend that we're reading memory
from a range that the process is unable to map.
(lldb) p ptr1
(char *) $4 = 0x3400fffffffff140 "\x80\xf1\xff\xff\xff\xff"
(lldb) p ptr2
(char *) $5 = 0x5600fffffffff140 "\x80\xf1\xff\xff\xff\xff"
(lldb) memory read ptr1 ptr2+16
0xfffffffff140: 80 f1 ff ff ff ff 00 00 38 70 bc f7 ff ff 00 00 ........8p......
Reviewed By: omjavaid, danielkiss
Differential Revision: https://reviews.llvm.org/D103626
Previously we would persist the flags indicating whether the remote side
supports a particular feature across reconnects, which is obviously not
a good idea.
I implement the clearing by nuking (its the only way to be sure :) the
entire GDBRemoteCommunication object in the disconnect operation and
creating a new one upon connection. This allows us to maintain a nice
invariant that the GDBRemoteCommunication object (which is now a
pointer) exists only if it is connected. The downside to that is that a
lot of functions now needs to check the validity of the pointer instead
of blindly accessing the object.
The process communication does not suffer from the same issue because we
always destroy the entire Process object for a relaunch.
Differential Revision: https://reviews.llvm.org/D116539
If LLVM is configured without X86 as one of its TARGETS_TO_BUILD, then lldb
will crash when using X86 disassembler (which it does while running `image
show-unwind`).
While working on D116788 (properly error out of `frame var`), this libstdc++
specific `frame var` invocation was found in the tests. This test is in the
generic directory, but has this one case that requires libstdc++. The fix here
is to put the one `expect()` inside of a condition that checks for libstdc++.
Differential Revision: https://reviews.llvm.org/D116901
This test checks for `aarch64` but the lit config could also contain `arm64`.
This change adds `arm64` to make the test pass in all cases.
Differential Revision: https://reviews.llvm.org/D116912
Ensure that errors in `frame variable` are reflected in result object.
The statistics for `frame variable` show invocations as being successful, even
when executing one of the error paths.
This change replaces `result.GetErrorStream()` with `result.AppendError()`,
which also sets the status to `eReturnStatusFailed`.
Differential Revision: https://reviews.llvm.org/D116788
(cherry picked from commit 2c7d10c412)
Fixes incomplete command names in `apropos` results.
The full command names given by `apropos` have come from command name string
literals given to `CommandObject` constructors. For most commands, this has
been accurate, but some commands have incorrect strings. This results in
`apropos` output that doesn't tell the user the full command name they might
want learn more about. These strings can be fixed.
There's a seperate issue that can't be fixed as easily: plugin commands. With
the way they're implemented, plugin commands have to exclude the root command
from their command name string. To illustrate, the `language objc` subcommand
has to set its command name string to "objc", which results in apropos printing
results as `objc ...` instead of `language objc ...`.
To fix both of these issues, this commit changes `FindCommandsForApropos` to
derive the fully qualified command name using the keys of subcommand maps.
Differential Revision: https://reviews.llvm.org/D116491
(cherry picked from commit b3bfd595a5)
When printing a std::string_view, print the referenced string as the
summary. Support string_view, u32string_view, u16string_view and
wstring_view, as we do for std::string and friends.
This is based on the existing fomratter for std::string, and just
extracts the data and length members, pushing them through the existing
string formatter.
In testing this, a "FIXME" was corrected for printing of non-ASCII empty
values. Previously, the "u", 'U" etc. prefixes were not printed for
basic_string<> types that were not char. This is trivial to resolve by
printing the prefix before the "".
Differential revision: https://reviews.llvm.org/D112222
Include the complete list of threads of all running processes
in the FreeBSDKernel plugin. This makes it possible to inspect
the states (including partial register dumps from PCB) of all kernel
and userspace threads at the time of crash, or at the time of reading
/dev/mem first.
Differential Revision: https://reviews.llvm.org/D116255
This reverts commit 640beb38e7.
That commit caused performance degradtion in Quicksilver test QS:sGPU and a functional test failure in (rocPRIM rocprim.device_segmented_radix_sort).
Reverting until we have a better solution to s_cselect_b64 codegen cleanup
Change-Id: Ibf8e397df94001f248fba609f072088a46abae08
Reviewed By: kzhuravl
Differential Revision: https://reviews.llvm.org/D115960
Change-Id: Id169459ce4dfffa857d5645a0af50b0063ce1105
D116372, while fixing one kind of a race, ended up creating a new one.
The new issue could occur when one inferior thread exits while another
thread initiates termination of the entire process (exit_group(2)).
With some bad luck, we could start processing the exit notification
(PTRACE_EVENT_EXIT) only to have the become unresponsive (ESRCH) in the
middle of the MonitorCallback function. This function would then delete
the thread from our list even though it wasn't completely dead (it stays
zombified until we read the WIFEXITED event). The linux kernel will not
deliver the exited event for the entire process until we process
individual thread exits.
In a pre-D116372 world, this wouldn't be a problem because we would read
this event (even though we would not know what to do with it) with
waitpid(-1). Now, when we issue invididual waitpids, this event will
never be picked up, and we end up hanging.
The fix for this is actually quite simple -- don't delete the thread in
this situation. The thread will be deleted when the WIFEXITED event
comes.
This situation was kind of already tested by
TestCreateDuringInstructionStep (which is how I found this problem), but
it was mostly accidental, so I am also creating a dedicated test which
reproduces this situation.
Unlike the rest of our SB objects, SBEvent and SBCommandReturnObject
have the ability to hold non-owning pointers to their non-SB
counterparts. This makes it hard to ensure the SB objects do not become
dangling once their backing object goes away.
While we could make these two objects behave like others, that would
require plubming even more shared pointers through our internal code
(Event objects are mostly prepared for it, CommandReturnObject are not).
Doing so seems unnecessarily disruptive, given that (unlike for some of
the other objects) I don't see any good reason why would someone want to
hold onto these objects after the function terminates.
For that reason, this patch implements a different approach -- the SB
objects will still hold non-owning pointers, but they will be reset to
the empty/default state as soon as the function terminates. This python
code will not crash if the user decides to store these objects -- but
the objects themselves will be useless/empty.
Differential Revision: https://reviews.llvm.org/D116162
Both serve the same purpose (finding shared libraries) and allow one to
launch a dynamically linked executable by just specifying the platform
sysroot.
The lldb-server code is currently set up in a way that each
NativeProcess instance does its own waitpid handling. This works fine
for BSDs, where the code can do a waitpid(process_id), and get
information for all threads in that process.
The situation is trickier on linux, because waitpid(pid) will only
return information for the main thread of the process (one whose tid ==
pid). For this reason the linux code does a waitpid(-1), to get
information for all threads. This was fine while we were supporting just
a single process, but becomes a problem when we have multiple processes
as they end up stealing each others events.
There are two possible solutions to this problem:
- call waitpid(-1) centrally, and then dispatch the events to the
appropriate process
- have each process call waitpid(tid) for all the threads it manages
This patch implements the second approach. Besides fitting better into
the existing design, it also has the added benefit of ensuring
predictable ordering for thread/process creation events (which come in
pairs -- one for the parent and one for the child). The first approach
OTOH, would make this ordering even more complicated since we would
have to keep the half-threads hanging in mid-air until we find the
process we should attach them to.
The downside to this approach is an increased number of syscalls (one
waitpid for each thread), but I think we're pretty far from optimizing
things like this, and so the cleanliness of the design is worth it.
The included test reproduces the circumstances which should demonstrate
the bug (which manifests as a hung test), but I have not been able to
get it to fail. The only place I've seen this failure modes are very
rare hangs in the thread sanitizer tests (tsan forks an addr2line
process to produce its error messages).
Differential Revision: https://reviews.llvm.org/D116372
This small patch adds two useful improvements:
- allows one to specify the emulator path as a bare filename, and have
it be looked up in the PATH
- allows one to leave the path empty and have the filename be derived
from the architecture.
It was being used only in some very old tests (which pass even without
it) and its implementation is highly questionable.
These days we have different mechanisms for requesting a build with a
particular kind of c++ library (USE_LIB(STD)CPP in the makefile).
Now that we are caching the dwarf index as well, we will always have
more than one cache file (when not using accelerator tables). I have
adjusted the test to check for the presence of one _symtab_ index.
This patch add the ability to cache the manual DWARF indexing results to disk for faster subsequent debug sessions. Manual DWARF indexing is time consuming and causes all DWARF to be fully parsed and indexed each time you debug a binary that doesn't have an acceptable accelerator table. Acceptable accelerator tables include .debug_names in DWARF5 or Apple accelerator tables.
This patch breaks up testing by testing all of the encoding and decoding of required C++ objects in a gtest unit test, and then has a test to verify the debug info cache is generated correctly.
This patch also adds the ability to track when a symbol table or DWARF index is loaded or saved to the cache in the "statistics dump" command. This is essential to know in statistics as it can help explain why a debug session was slower or faster than expected.
Reviewed By: labath, wallace
Differential Revision: https://reviews.llvm.org/D115951
Introduce initial support for using libkvm on FreeBSD. The library
can be used as an alternate implementation for processing kernel
coredumps but it can also be used to access live kernel memory through
specifying "/dev/mem" as the core file, i.e.:
lldb --core /dev/mem /boot/kernel/kernel
Differential Revision: https://reviews.llvm.org/D116005
Version 2 of 'main bin spec' LC_NOTE allows for the specification
of a slide of where the binary is loaded in the corefile virtual
address space. It also adds a (currently unused) platform field
for the main binary.
Some corefile creators will only have a UUID and an offset to be
applied to the binary.
Changed TestFirmwareCorefiles.py to test this new form of
'main bin spec' with a slide, and also to run on both x86_64
and arm64 macOS systems.
Differential Revision: https://reviews.llvm.org/D116094
rdar://85938455
