Summary: In sample profile, some branches may have profile missing due to profile inaccuracy. We want existing branch probability still valid after propagation.
Reviewers: hfinkel, davidxl, spatel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D19948
llvm-svn: 269137
Retrying r268550/r268751 which were reverted at r268577/r268765 due a memory sanitizer failure.
I have not been able to reproduce that failure, but I've taken another guess at fixing
the problem in this version of the patch and will watch for another failure.
Original commit message:
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268767
Retrying r268550 which was reverted at r268577 due a memory sanitizer failure.
I have not been able to reproduce that failure, but I've taken a guess at fixing
the problem in this version of the patch and will watch for another failure.
Original commit message:
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268751
MemorySanitizer: use-of-uninitialized-value
0x4910e47 in count /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/Support/MathExtras.h:159:12
0x4910e47 in countLeadingZeros<unsigned long> /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/include/llvm/Support/MathExtras.h:183
0x4910e47 in FitWeights /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/Transforms/Utils/SimplifyCFG.cpp:855
0x4910e47 in SimplifyCondBranchToCondBranch /mnt/b/sanitizer-buildbot2/sanitizer-x86_64-linux-bootstrap/build/llvm/lib/Transforms/Utils/SimplifyCFG.cpp:2895
This reverts commit 609f4dd4bf3bc735c8c047a4d4b0a8e9e4d202e2.
llvm-svn: 268577
Unlike earlier similar fixes, we need to recalculate the branch weights
in this case.
Differential Revision: http://reviews.llvm.org/D19674
llvm-svn: 268550
This patch fixes PR27615.
@llvm.dbg.value instructions no longer count towards the maximum number of
instructions to look back at in the instruction list when searching for a
store instruction. This should make the output consistent between debug and
non-debug build.
Patch by Henric Karlsson <henric.karlsson@ericsson.com>!
Differential Revision: http://reviews.llvm.org/D19912
llvm-svn: 268512
Make it possible that TryToSimplifyUncondBranchFromEmptyBlock merges empty
basic block including lifetime intrinsics as well as phi nodes and
unconditional branch into its successor or predecessor(s).
If successor of empty block has single predecessor, all contents including
lifetime intrinsics are sinked into the successor. Otherwise, they are
hoisted into its predecessor(s) and then merged into the predecessor(s).
Patch by Josh Yoon <josh.yoon@samsung.com>!
Differential Revision: http://reviews.llvm.org/D19257
llvm-svn: 268254
When SimplifyCFG merges identical instructions from both sides of a diamond, it
can preserve !llvm.mem.parallel_loop_access (as it does with most of the other
metadata). There's no real data or control dependency change in this case.
llvm-svn: 267515
Summary: eq imply [u|s]ge and [u|s]le are true.
Remove redundant logic by implementing isImpliedFalseByMatchingCmp(Pred1, Pred2)
as isImpliedTrueByMatchingCmp(Pred1, getInversePredicate(Pred2)).
llvm-svn: 267177
Summary: [u|s]gt and [u|s]lt imply [u|s]ge and [u|s]le are true, respectively.
I've simplified the existing tests and added additional tests to cover the new
cases mentioned above. I've also added tests for all the cases where the
first compare doesn't imply anything about the second compare.
llvm-svn: 267171
A followup commit will replace these tests with simplified and more inclusive
tests. The diff is unreadable if this were to be done in a single commit.
llvm-svn: 267170
Summary:
`llvm.guard(false)` always bails out of the current compilation unit, so
we can prune any control flow following it.
Reviewers: hfinkel, pcc, reames
Subscribers: majnemer, reames, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19245
llvm-svn: 266955
This patch improves SimplifyCFG to catch cases like:
if (a < b) {
if (a > b) <- known to be false
unreachable;
}
Phabricator Revision: http://reviews.llvm.org/D18905
llvm-svn: 266767
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
This is almost identical to:
http://reviews.llvm.org/rL264527
This doesn't solve PR27344; it just allows the profile weights to survive.
To solve the bug, we need to use the profile weights in the backend.
llvm-svn: 266442
This mostly cosmetic patch moves the DebugEmissionKind enum from DIBuilder
into DICompileUnit. DIBuilder is not the right place for this enum to live
in — a metadata consumer should not have to include DIBuilder.h.
I also added a Verifier check that checks that the emission kind of a
DICompileUnit is actually legal.
http://reviews.llvm.org/D18612
<rdar://problem/25427165>
llvm-svn: 265077
When eliminating or merging almost empty basic blocks, the existence of non-trivial PHI nodes
is currently used to recognize potential loops of which the block is the header and keep the block.
However, the current algorithm fails if the loops' exit condition is evaluated only with volatile
values hence no PHI nodes in the header. Especially when such a loop is an outer loop of a nested
loop, the loop is collapsed into a single loop which prevent later optimizations from being
applied (e.g., transforming nested loops into simplified forms and loop vectorization).
The patch augments the existing PHI node-based check by adding a pre-test if the BB actually
belongs to a set of loop headers and not eliminating it if yes.
llvm-svn: 264697
When eliminating or merging almost empty basic blocks, the existence of non-trivial PHI nodes
is currently used to recognize potential loops of which the block is the header and keep the block.
However, the current algorithm fails if the loops' exit condition is evaluated only with volatile
values hence no PHI nodes in the header. Especially when such a loop is an outer loop of a nested
loop, the loop is collapsed into a single loop which prevent later optimizations from being
applied (e.g., transforming nested loops into simplified forms and loop vectorization).
The patch augments the existing PHI node-based check by adding a pre-test if the BB actually
belongs to a set of loop headers and not eliminating it if yes.
llvm-svn: 264596
This is similar to D18133 where we allowed profile weights on select instructions.
This extends that change to also allow the 'unpredictable' attribute of branches to apply to selects.
A test to check that 'unpredictable' metadata is preserved when cloning instructions was checked in at:
http://reviews.llvm.org/rL263648
Differential Revision: http://reviews.llvm.org/D18220
llvm-svn: 263716
I'm testing out a script that auto-generates the check lines.
It's 98% copied from utils/update_llc_test_checks.py.
If others think this is useful, please let me know.
llvm-svn: 263668
I'm testing out a script that auto-generates the check lines.
It's 98% copied from utils/update_llc_test_checks.py.
If others think this is useful, please let me know.
llvm-svn: 263667
As noted in:
https://llvm.org/bugs/show_bug.cgi?id=26636
This doesn't accomplish anything on its own. It's the first step towards preserving
and using branch weights with selects.
The next step would be to make sure we're propagating the info in all of the other
places where we create selects (SimplifyCFG, InstCombine, etc). I don't think there's
an easy fix to make this happen; we have to look at each transform individually to
determine how to correctly propagate the weights.
Along with that step, we need to then use the weights when making subsequent transform
decisions such as discussed in http://reviews.llvm.org/D16836.
The inliner test is independent but closely related. It verifies that metadata is
preserved when both branches and selects are cloned.
Differential Revision: http://reviews.llvm.org/D18133
llvm-svn: 263482
DeleteDeadBlock was called indiscriminately, leading to cleanuprets with
undef cleanuppad references.
Instead, try to drain the BB of most of it's instructions if it is
unreachable. We can then remove the BB if it solely consists of a
terminator (and maybe some phis).
llvm-svn: 261731
Cleanuppads may be merged together if one is the only predecessor of the
other in which case a simple transform can be performed: replace the
a cleanupret with a branch and remove an unnecessary cleanuppad.
Differential Revision: http://reviews.llvm.org/D17459
llvm-svn: 261390
Summary:
Performing this optimization duplicates the call to the convergent
function and adds new control-flow dependencies, which is a no-no.
Reviewers: jingyue
Subscribers: broune, hfinkel, tra, resistor, joker.eph, arsenm, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17128
llvm-svn: 260730
D16251)
Summary:
This is a simpler fix to the problem than the dominator approach in
http://reviews.llvm.org/D16251. It adds only values into the gather() while loop
that have been seen before.
The actual endless loop is in the constant compare gather() routine in
Utils/SimplifyCFG.cpp. The same value ret.0.off0.i is pushed back into the
queue:
%.ret.0.off0.i = or i1 %.ret.0.off0.i, %cmp10.i
Here is what happens at the IR level:
for.cond.i: ; preds = %if.end6.i,
%if.end.i54
%ix.0.i = phi i32 [ 0, %if.end.i54 ], [ %inc.i55, %if.end6.i ]
%ret.0.off0.i = phi i1 [false, %if.end.i54], [%.ret.0.off0.i, %if.end6.i] <<<
%cmp2.i = icmp ult i32 %ix.0.i, %11
br i1 %cmp2.i, label %for.body.i, label %LBJ_TmpSimpleNeedExt.exit
if.end6.i: ; preds = %for.body.i
%cmp10.i = icmp ugt i32 %conv.i, %add9.i
%.ret.0.off0.i = or i1 %ret.0.off0.i, %cmp10.i <<<
When if.end.i54 gets eliminated which removes the definition of ret.0.off0.i.
The result is the expression %.ret.0.off0.i = or i1 %.ret.0.off0.i, %cmp10.i
(Note the first ‘or’ operand is now %.ret.0.off0.i, and *NOT* %ret.0.off0.i).
And
now there is use of .ret.0.off0.i before a definition which triggers the
“endless” loop in gather():
while(!DFT.empty()) {
V = DFT.pop_back_val(); // V is .ret.0.off0.i
if (Instruction *I = dyn_cast<Instruction>(V)) {
// If it is a || (or && depending on isEQ), process the operands.
if (I->getOpcode() == (isEQ ? Instruction::Or : Instruction::And)) {
DFT.push_back(I->getOperand(1)); // This is now .ret.0.off0.i also
DFT.push_back(I->getOperand(0));
continue; // “endless loop” for .ret.0.off0.i
}
Reviewers: reames, ahatanak
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16839
llvm-svn: 259730
