Previously it was initialized by ProcessLinux but lldb-server don't
contain ProcessLinux anymore so it have to be initialized by
NativeProcessLinux also.
Differential revision: http://reviews.llvm.org/D8080
llvm-svn: 231482
The deadlock occurred when the Attach or the Launch operation failed for
any reason.
Differential revision: http://reviews.llvm.org/D8030
llvm-svn: 231231
Previously the operation thread is stopped with a cancel event but
pthread_cancel is not supported on android. This CL creates a custom
operation which asks the operation thread to exit without any pthread
call.
Differential revision: http://reviews.llvm.org/D7937
llvm-svn: 230945
Summary:
syscalls involving pid/tid on 32 bit binaries are failing with
"Invalid argument" because the uint64_t arguments are too wide.
Reviewers: clayborg, ovyalov, sivachandra
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7963
llvm-svn: 230817
Summary:
They'll be set anyway when the thread starts running, so the launching threads
should just ignore the set request.
Reviewers: ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7914
llvm-svn: 230671
Add O_TRUNC when opening file for redirecting stdout and stderr of the
process. It is neccessary because if the file exists then on some
platform the original content is kept while it isn't overwritten by the
new data causing pollution of the saved stdout and stderr.
llvm-svn: 230492
Currently it is uses the same code used on linux. Will be replaced with
android specific code if needed.
Differential Revision: http://reviews.llvm.org/D7613
llvm-svn: 229371
'-Winconsistent-missing-override' warning. I suggest folks use this to
ensure that override is consistently used to mark virtual function
overrides.
llvm-svn: 229084
Summary:
After closing all the leaked file descriptors to the inferior tty, the following problem occured:
- when stdin, stdout and stderr are redirected, there are no slave descriptors open (which is good)
- lldb has a reader thread, which attempts to read from the master end of the tty
- this thread receives an EOF
- in response, it closes it's master end
- as this is the last open file descriptor for the master end, this deletes the tty and sends
SIGHUP to the inferior (this is bad)
I fix this problem by making sure the master end remains open for the duration of the inferior
process by storing a copy of the file descriptor in ProcessMonitor. I create a copy to avoid
ownership issues with the reading thread.
Reviewers: ovyalov, emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7440
llvm-svn: 228391
* Fix cmake script for android x86
* Reorder includes to avoid collision between system macros and local
variables in clang framework
Differential Revision: http://reviews.llvm.org/D7435
llvm-svn: 228388
* Set the state of the process into running/stepping on continue/step operations
* Add mutex to use transactions in Thread State Coordinator
** It is required because the events from two Signal Handler or form a Signal handler and a Resume request shouldn't overlap
* Send Stop Replay Packet only when the state of the process changed
Differential Revision: http://reviews.llvm.org/D7374
llvm-svn: 228387
Summary:
Both LLDB and LLGS are leaking file descriptors into the debugged process. This plugs the leak by
closing the unneeded descriptors. In one case I use O_CLOEXEC, which I hope is supported on
relevant platforms. I also added a regression test and plugged a fd leak in dosep.py.
Reviewers: vharron, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7372
llvm-svn: 228130
Remove implicit stop action on $vCont package for threads where no
explicit action or default action specified based on the specification
(they have to stay in there original state).
llvm-svn: 227933
NativeProcessLinux::MonitorSignal was automatically resuming threads
that stopped due to a signal. This is inconsistent with the
behavior of lldb and gdb. This change removes the automatic resume.
Fixes
TestSendSignal.py
TestSignalsAPI.py
if PLATFORM_LINUX_FORCE_LLGS_LOCAL is in the environment vars.
llvm-svn: 227918
Note this code path should not happen - it implies a bug in another part of
the code. For the thread to receive the stop signal as it is handled, the
and for it to already have a stop reason, it implies the kernel was able to
tell the thread that it stopped while it was stopped. More likely this
seems to indicate a bug where an actual thread start was not getting correctly
logged. If it does get hit, we'll want to understand the sequence to figure
out if it is truly legitimate or if it implies another bug.
llvm-svn: 227916
It looks like Shawn's fix addresses what the initial hijacking was trying
to accomplish per conversations with Greg and Jim. The hijacking was
causing several tests to hang (#61, #62, #63, #64, #67, possibly more).
These tests now just fail rather than hang with this modification.
llvm-svn: 227914
* When the thread state coordinator is told to skip sending a stop request
for a running thread that is ignored (e.g. the thread that steps in a
step operation is technically running and should not have a stop sent
to it, since it will stop of its own accord per the kernel step operation),
ensure the deferred signal notification logic still waits for the
skipped thread. (i.e. we want to defer the notification until the
stepping thread is indeed stopped, we just don't want to send it a tgkill).
* Add ThreadStateCoordinator::RequestResumeAsNeeded(). This variant of the
RequestResume() method does not call the error function when the thread
is already running. Instead, it just logs that the thread is already
running and skips the resume operation. This is useful for the case of
vCont;c handling, where we tell all threads that they should be running.
At the place we're calling, all we know is "we want this thread running if
it isn't already," and that's exactly what this command does.
* Formatting change (minor) in NativeThreadLinux logging.
llvm-svn: 227913
See https://github.com/tfiala/lldb/issues/75. Not fixed yet but
continuing to push this further.
Fixes:
* Resume() now skips doing deferred notifications if we're doing a
vCont;{c,C}. In this case, we're trying to start something up,
not defer a stop notification. The default thread action stop
mode pickup was triggering a stop because it had at least one
stop, which was wrong in the case of a continue. (Bug introduced
by previous change.)
* Added a variant to ThreadStateCoordinator to specify a set of
thread ids to be skipped when triggering stop notifications to
non-stopped threads on a deferred signal call. For the case of
a stepping thread, it is actually told to step (and is running)
for a brief moment, but the thread state coordinator would think
it needed to send the stepping thread a stop, which id doesn't
need to do. This facility allows me to get around that cleanly.
With this change, behavior is now reduced to something I think is
essentially a different bug:
* Doing a step into libc code from my code crashes llgs.
* Doing a next out of a function in my own code crashes llgs.
llvm-svn: 227912
Tracked down while working on https://github.com/tfiala/lldb/issues/75.
This is not a complete fix for that issue, but moves us farther along.
Fixes:
* When a thread step is requested via vCont:{s,S}, Resume() now marks
the stepping thread as (1) currently stepping and (2) does trigger
the deferred signal for the stepped thread. This fixes a bug where
we were actually triggering a deferred stop cycle here for the non-stepping
thread since the single step thread was not part of the Resume()
deferred signal mechanism. The stepping thread is also marked in
the thread state coordinator as running (via a resume callback).
* When we get the SIGTRAP signal for the step completion, we don't
do a deferred signal call - that happened during the vCont:{s,S}
processing in Resume() already. Now we just need to mark that
the stepping thread is now stopped. If this is the last thread
in the set that needs to stop, it will trigger the process/delegate
stop call that will notify lldb. Otherwise, that'll happen when
the final thead we're waiting for stops.
Misc:
* Fixed up thread stop logging to use a leading 0 (0x%PRIx32) so
we don't get log lines like 0x5 for 0x05 SIGTRAP.
llvm-svn: 227911
* Fixed bug in run loop where run loop return enum was being treated
erroneously like an int, causing the TSC event loop to terminate
prematurely.
* Added an explicit scope in NativeProcessLinux::Resume() for the
threads lock lifetime. (This was likely unnecessary but is
more explicit.)
* Fixed a bug in ThreadStateCoordinator where resume execution was
not updating the internal state about the thread assumed to be
running now. I'll add a test and upstream this in a moment.
* Added a verbose logging mechanism to event processing within
ThreadStateCoordinator. It is currently enabled when the
'log enable lldb thread' is true upon inferior launch/attach.
llvm-svn: 227909
LLDB supports many different register numbering schemes, and these
are typically prefixed with an indicator that lets the user know
what numbering scheme is used. The gcc numbering scheme is
prefixed with gcc, and there are similar ones for dwarf, gdb,
and gcc_dwarf.
LLDB also contains its own internal numbering scheme, but the enum
for LLDB's numbering scheme was prefixed differently. This patch
changes the names of these enums to use the same naming scheme for
the enum values as the rest of the register kinds by removing gpr_
and fpu_ prefixes, and instead using lldb_ prefixes for all enum
values.
Differential Revision: http://reviews.llvm.org/D6351
Reviewed by: Greg Clayton
llvm-svn: 222495
With this change, both local-process llgs and remote-target llgs stdout/stderr
handling from inferior work correctly.
Several log lines have been added around PTY and stdout/stderr redirection
logic on the lldb client side.
Regarding remote llgs execution, see the following:
With these changes, remote llgs with $O now works properly:
$ lldb
(lldb) platform select remote-linux
(lldb) target create ~/some/inferior/exe
(lldb) gdb-remote {some-target}:{port}
(lldb) run
The sequence above will correctly redirect stdout/stderr over gdb-remote $O,
as is needed for remote debugging. That sequence assumes there is a lldb-gdbserver
exe running on the target with {some-host}:{port}.
You can replace the gdb-remote command with a '(lldb) platform connect
connect://{target-ip}:{target-port}'. If you do this and have a
lldb-platform running on the remote end, it will go ahead and launch
llgs for lldb for each target instance that is run/attached.
For local debugging with llgs, the following sequence also works, and
uses local PTYs instead to avoid $O and extra gdb-remote messages:
$ lldb
(lldb) settings set platform.plugin.linux.use-llgs true
(lldb) target create ~/some/inferior/exe
(lldb) run
The above will run the inferior using llgs on the local host, and
will use PTYs rather than $O redirection.
This change also removes the logging that happened after the fork but
before the exec when llgs is launching a new inferior process. Some
aspect of the file handling during that portion of code would not do
the right thing with log handling. We might want to go back later
and have that communicate over a pipe from the child to parent to pass
along any messages that previously were logged in that section of code.
llvm-svn: 219578
See http://reviews.llvm.org/D5695 for details.
This change does the following:
Enable lldb-gdbserver (llgs) usage for local-process Linux debugging.
To turn on local llgs debugging support, which is disabled by default, enable this setting:
(lldb) settings set platform.plugin.linux.use-llgs-for-local true
Adds a stream-based Dump() function to FileAction.
Pushes some platform methods that Linux (and FreeBSD) will want to share with MacOSX from PlatformDarwin into PlatformPOSIX.
Reviewed by Greg Clayton.
llvm-svn: 219457
Adds a test to verify that a thread resume request marks the thread as running
after doing the resume callback. This test fails without the corresponding
ThreadStateCoordinator.cpp change.
Fixes the code where that state was not maintained.
llvm-svn: 219412
Added tests and impl to make sure the following errors are reported:
* Notifying a created thread that we are already tracking.
* Notifying a thread death for a thread we don't know about.
llvm-svn: 218900
Now that ThreadStateCoordinator errors out on threads in unexpected states,
it has enough information to know which threads need stop requests fired
when we want to do a deferred callback on a thread's behalf. This change
adds a new method, CallAfterRunningThreadsStop(...), which no longer
takes a set of thread ids that require stop requests. It's much harder
to misuse this method and (with newer error logic) it's harder to
correctly use the original method. Expect the original method that takes
the set of thread ids to stop to disappear in the near future.
Adds several tests for CallAfterRunningThreadsStop().
llvm-svn: 218897
Added tests to verify that the coordinator signals an error if
the given thread to resume is unknown, and if the thread is through to
be running already.
Modified resume handling code to match tests.
llvm-svn: 218872
ThreadStateCoordinator changes:
* Most commands that run in the queue now take an error handler that
will be called with an error string if an error occurs during processing.
Errors generally stop the operation in progress. The errors are checked
at time of execution. This is intended to help flush out ptrace/waitpid/state management
issues as quickly as possible.
* Threads now must be known to the coordinator before stops can be reported,
resumes can be requested, thread deaths can be reported, or deferred stop
notifications can be made. Failure to know the thread will cause the coordinator
to call the error callback for the event being processed. Threads are introduced
to the system by the NotifyThreadCreate method.
* The NotifyThreadCreate method now takes the initial state of the thread being
introduces to the system. We no longer just assume the thread is running.
The test cases were cleaned up, too:
* A gtest test fixture is now used, which allows creating less verbose helper
methods that setup common pieces of callback code for some method invocations.
Net result: the tests are simpler to read and shorter to write.
llvm-svn: 218833
ThreadIDFunc => ThreadIDFunction
LogFunc => LogIDFunction
We try to avoid abbreviations/shortened names. Adjusted function parameter names
as well to replace _func with _function.
llvm-svn: 218773
