Summary:
After closing all the leaked file descriptors to the inferior tty, the following problem occured:
- when stdin, stdout and stderr are redirected, there are no slave descriptors open (which is good)
- lldb has a reader thread, which attempts to read from the master end of the tty
- this thread receives an EOF
- in response, it closes it's master end
- as this is the last open file descriptor for the master end, this deletes the tty and sends
SIGHUP to the inferior (this is bad)
I fix this problem by making sure the master end remains open for the duration of the inferior
process by storing a copy of the file descriptor in ProcessMonitor. I create a copy to avoid
ownership issues with the reading thread.
Reviewers: ovyalov, emaste
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D7440
llvm-svn: 228391
Summary:
This adds the register plumbing, as well as register reading in FreeBSD core
dumps. Further work on the POSIX/FreeBSD ProcessMonitor is required in order to
support ptrace access to these registers.
Reviewers: tfiala, emaste
Reviewed By: emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D7039
llvm-svn: 228278
Summary:
Taking advantage of the new 'CFAIsRegisterDereferenced' CFA register type, add
full stack unwind support to the PowerPC/PowerPC64 ABI. Also, add a new
register set for powerpc32-on-64, so the register sizes are correct. This also
requires modifying the ProcessMonitor to add support for non-uintptr_t-sized
register values.
Reviewers: jasonmolenda, emaste
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D6183
llvm-svn: 221789
Summary:
This adds preliminary support for PowerPC/PowerPC64, for FreeBSD. There are
some issues still:
* Breakpoints don't work well on powerpc64.
* Shared libraries don't yet get loaded for a 32-bit process on powerpc64 host.
* Backtraces don't work. This is due to PowerPC ABI using a backchain pointer
in memory, instead of a dedicated frame pointer register for the backchain.
* Breakpoints on functions without debug info may not work correctly for 32-bit
powerpc.
Reviewers: emaste, tfiala, jingham, clayborg
Reviewed By: clayborg
Subscribers: emaste, lldb-commits
Differential Revision: http://reviews.llvm.org/D5988
llvm-svn: 220944
r218568 added an explicit #include of the Linux ProcessMonitor.h to
POSIXThread.cpp, rather than including just "ProcessMonitor.h" and
relying on the build infrastructure for the appropriate paths.
For now add #ifdefs in the source to use the FreeBSD or Linux header
as appropriate; a cleaner fix (and perhaps some refactoring of the
POSIX classes) should still be done later.
llvm-svn: 218762
See http://reviews.llvm.org/D5495 for more details.
These are changes that are part of an effort to support building llgs, within the AOSP source tree, using the Android.mk
build system, when using the llvm/clang/lldb git repos from AOSP replaced with the experimental ones currently in
github.com/tfiala/aosp-{llvm,clang,lldb,compiler-rt}.
llvm-svn: 218568
There are several places where multiple threads are accessing the same variables simultaneously without any kind of protection. I propose using std::atomic<> to make it safer. I did a special build of lldb, using the google tool 'thread sanitizer' which identified many cases of multiple threads accessing the same memory. std::atomic is low overhead and does not use any locks for simple types such as int/bool.
See http://reviews.llvm.org/D5302 for more details.
Change by Shawn Best.
llvm-svn: 217818
This patch moves creates a thread abstraction that represents a
thread running inside the LLDB process. This is a replacement for
otherwise using lldb::thread_t, and provides a platform agnostic
interface to managing these threads.
Differential Revision: http://reviews.llvm.org/D5198
Reviewed by: Jim Ingham
llvm-svn: 217460
This makes sure that nothing that requires Python is being built
when the LLDB_DISABLE_PYTHON flag is being passed in.
It also changes a use of CPPFLAGS to CPP.Flags since the former is overridden
when external flags are passed in while the later is not. I'm not sure exactly
why LLDB_DISABLE_PYTHON is in CXXFLAGS rather than CPPFLAGS,
but cleaning that up is for another commit.
Differential Revision: http://reviews.llvm.org/D4918
llvm-svn: 217414
See http://reviews.llvm.org/D5108 for details.
This change does the following:
* eliminates the Process::GetUnixSignals() virtual method and replaces with a fixed getter.
* replaces the Process UnixSignals storage with a shared pointer.
* adds a Process constructor variant that can be passed the UnixSignalsSP. When the constructor without the UnixSignalsSP is specified, the Host's default UnixSignals is used.
* adds a host-specific version of GetUnixSignals() that is used when we need the host's appropriate UnixSignals variant.
* replaces GetUnixSignals() overrides in PlatformElfCore, ProcessGDBRemote, ProcessFreeBSD and ProcessLinux with code that appropriately sets the Process::UnixSignals for the process.
This change also enables some future patches that will enable llgs to be used for local Linux debugging.
llvm-svn: 216748
Yet another step toward ARM64 support. With this commit, lldb-gdbserver started on ARM64 target can be accessed by lldb running on desktop PC and it can process simple commands (like 'continue'). Still ARM64 support lacks NativeRegisterContextLinux_arm64.* code which waits to be implemented.
Based on similar files for Linux x86_64 and Darwin ARM64. Due to common code extraction from Darwin related files, lldb should be tested for any unexpected regression on Darwin ARM64 machines too.
See the following for more details:
http://reviews.llvm.org/D4580http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140825/012670.html
Change by Paul Osmialowski.
llvm-svn: 216737
More specifically, this change can be summarized as follows:
1) Makes an lldbHostPosix library which contains code common to
all posix platforms.
2) Creates Host/FileSystem.h which defines a common FileSystem
interface.
3) Implements FileSystem.h in Host/windows and Host/posix.
4) Creates Host/FileCache.h, implemented in Host/common, which
defines a class useful for storing handles to open files needed
by the debugger.
Differential Revision: http://reviews.llvm.org/D4889
llvm-svn: 215775
FileAction was previously a nested class in ProcessLaunchInfo.
This led to some unfortunate style consequences, such as requiring
the AddPosixSpawnFileAction() funciton to be defined in the Target
layer, instead of the more appropriate Host layer. This patch
makes FileAction its own independent class in the Target layer,
and then moves AddPosixSpawnFileAction() into Host as a result.
Differential Revision: http://reviews.llvm.org/D4877
llvm-svn: 215649
This change brings in lldb-gdbserver (llgs) specifically for Linux x86_64.
(More architectures coming soon).
Not every debugserver option is covered yet. Currently
the lldb-gdbserver command line can start unattached,
start attached to a pid (process-name attach not supported yet),
or accept lldb attaching and launching a process or connecting
by process id.
The history of this large change can be found here:
https://github.com/tfiala/lldb/tree/dev-tfiala-native-protocol-linux-x86_64
Until mid/late April, I was not sharing the work and continued
to rebase it off of head (developed via id tfiala@google.com). I switched over to
user todd.fiala@gmail.com in the middle, and once I went to github, I did
merges rather than rebasing so I could share with others.
llvm-svn: 212069
Also moved it into the lldb_private namespace.
The llgs branch is making use of this interface and its use is not
strictly limited to POSIX.
llvm-svn: 209016
On FreeBSD ptrace(PT_KILL) is used to terminate the traced process
(as if PT_CONTINUE had been used with SIGKILL as the signal to be
delivered), and is the desired behaviour for ProcessPOSIX::DoDestroy.
On Linux, after ptrace(PTRACE_KILL) the traced process still exists
and can be interrogated. It is only upon resume that it exits as though
it received SIGKILL.
As the Linux PTRACE_KILL behaviour is not used by LLDB, rename
BringProcessIntoLimbo to Kill, and change the implementation to simply
call kill() instead of using ptrace.
Thanks to Todd F for testing (Ubuntu 12.04, gcc 4.8.2).
Sponsored by: DARPA, AFRL
Differential Revision: http://llvm-reviews.chandlerc.com/D3159
llvm-svn: 205337
On FreeBSD ptrace(PT_KILL) is used to terminate the traced process
(as if PT_CONTINUE had been used with SIGKILL as the signal to be
delivered), and is the desired behaviour for ProcessPOSIX::DoDestroy.
On Linux, after ptrace(PTRACE_KILL) the traced process still exists
and can be interrogated. It is only upon resume that it exits as though
it received SIGKILL.
For now I'm committing only the FreeBSD change, until the Linux change
(review D3159) is successfully tested.
http://llvm.org/pr18894
llvm-svn: 205315
Fix Windows build by adding JITLoaderGDB and ProcessElfCore.
RegisterContext: fixes for Windows build: sizeof(GPR::register) didn't work, switched to sizeof(((GPR*)NULL)->register).
llvm-svn: 203667
memcpy cannot be passed NULL. Ensuring that the destination pointer is non-NULL
requires checking success. Rather than performing the success check at that
point, increasing indentation an additional level, fold it into the previous
statement.
llvm-svn: 203359
This change uses a fixed known offset for the Linux i386 DR0 register.
This change also undoes the 32-bit wordsize change from r169645 that
revolved around being 32-bit/64-bit friendly in
WriteRegOperation::Execute within the Linux ProcessMonitor.cpp. I ran
all the tests on x86_64 Linux with no failures. I also ran some simple
tests with 32-bit Linux exe on x86_64 host and 32-bit linux exe on
i686 32-bit host and these worked fine.
Note (from Todd): the UserData struct in the Linux i386 register
context (only used by Linux i386 host running Linux 32-bit inferior)
is out of sync with what shows up in the sys/user.h for an 32-bit
Linux build (per an earlier change of mine to make it look more like
x86_64 host running x86 exe). I think we should (1) make i386 Linux
targets run using the same register context (and correct ones) on i386
and x86_64 linux hosts if that is possible, and (2) we could use some
tests around the register handling, particularly to verify things like
DR0 registers are in the right spots on host/target combos that we can
verify vs. known correct values.
Change by Matthew Gardiner.
llvm-svn: 202887
This seems a little more straightforward and is equivalent to r201457
for ELF core files. A case for FreeBSD i386 is also added (it was
incorrectly using the 64-bit register context and corrupting mememory).
Better (user-facing) error handling is still needed.
Review: http://llvm-reviews.chandlerc.com/D2765
llvm-svn: 202549
This change fixes up issues with specifying the size of the i386
register infos for FPU registers. The bug was that for the i386
register context, the size of the FPU registers were still being
computed based on the x86_64 FXSAVE structure.
This change permits the FPR_SIZE macro to optionally be defined
outside of RegisterInfos_i386.h, which RegisterContextLinux_i386.cpp
does properly. It redefines the FPR_i386 structure with all the
accessible parts that RegisterInfos_i386.h wants to see, which we had
not done before when we made the overall size of the structure
properly sized a recently.
This change also modifies POSIXThread to create a
RegisterContextLinux_i386 only when the host is 32-bit; otherwise, it
uses the RegisterContextLinux_x86_64, which works properly for 32-bit
and 64-bit inferiors on a 64-bit host.
I tested this debugging a Linux x86 exe on an x86 host (Ubuntu 13.10
x86), and debugging a Linux x86 exe and a Linux x86-64 exe on an
x86-64 host (Ubuntu 12.04 LTS). Those cases all worked.
Thanks to Matthew Gardiner who discoverd may key insights into
tracking down the issue. The motivation for this change and some of
the code originates from him via this thread:
http://lists.cs.uiuc.edu/pipermail/lldb-commits/Week-of-Mon-20140224/010554.html
llvm-svn: 202428
This fix changes thee x86 32-bit floating point register area to be
the proper size independent of the host platform.
Note as of this change list, this register context is not yet used
since selecting it exposes issues with watchpoint assertions.
Change by Matthew Gardiner.
llvm-svn: 202285
Implement x86_64 debug register read/write in support of hardware
watchpoints. Hoist LinuxThread::TraceNotify code back into
POSIXThread::TraceNotify()
Patch by John Wolfe.
We still need to rework this later to avoid the #ifdef FreeBSD.
llvm-reviews.chandlerc.com/D2572
llvm.org/pr16706
llvm-svn: 201706
Michael Sartain refactored RegisterContextPOSIX_* in r192332, and I must
have missed the now-shadowed variable when I rebased the FreeBSD MIPS64
register context after that.
llvm-svn: 201334
symbols correctly. There were a couple of pieces to this.
1) When a breakpoint location finds itself pointing to an Indirect symbol, when the site for it is created
it needs to resolve the symbol and actually set the site at its target.
2) Not all breakpoints want to do this (i.e. a straight address breakpoint should always set itself on the
specified address, so somem machinery was needed to specify that.
3) I added some info to the break list output for indirect symbols so you could see what was happening.
Also I made it clear when we re-route through re-exported symbols.
4) I moved ResolveIndirectFunction from ProcessPosix to Process since it works the exact same way on Mac OS X
and the other posix systems. If we find a platform that doesn't do it this way, they can override the
call in Process.
5) Fixed one bug in RunThreadPlan, if you were trying to run a thread plan after a "running" event had
been broadcast, the event coalescing would cause you to miss the ThreadPlan running event. So I added
a way to override the coalescing.
6) Made DynamicLoaderMacOSXDYLD::GetStepThroughTrampolinePlan handle Indirect & Re-exported symbols.
<rdar://problem/15280639>
llvm-svn: 198976
