This removes existing code duplication and allows us to
assert that we are handling the expected cases.
We have a list of outstanding bugs that could benefit by
handling truncated source values, so that's a possible
addition going forward.
Summary:
The following combine currently breaks in the DAGCombiner:
```
extract_vector_elt (concat_vectors v4i16:a, v4i16:b), x
-> extract_vector_elt a, x
```
This happens because after we have combined these nodes we have inserted nodes
that use individual instances of the vector element type. In the above example
i16. However this isn't a legal type on all backends, and when the combining pass calls
the legalizer it breaks as it expects types to already be legal. The type legalizer has
already been run, and running it again would make a mess of the nodes.
In the example code at least, the generated code is still efficient after the change.
Reviewers: miyuki, arsenm, dmgreen, lebedev.ri
Reviewed By: miyuki, lebedev.ri
Subscribers: lebedev.ri, wdng, hiraditya, steven.zhang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83231
Summary:
When splitting a load of a scalable type, the new address is
calculated in SplitVecRes_LOAD using a vscale and an add instruction.
This patch also adds a DAG combiner fold to visitADD for vscale:
- Fold (add (vscale(C0)), (vscale(C1))) to (add (vscale(C0 + C1)))
Reviewers: sdesmalen, efriedma, david-arm
Reviewed By: david-arm
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82792
X / (fabs(A) * sqrt(Z)) --> X / sqrt(A*A*Z) --> X * rsqrt(A*A*Z)
In the motivating case from PR46406:
https://bugs.llvm.org/show_bug.cgi?id=46406
...this is restoring the sequence that was originally in the source code.
We extracted a term from within the sqrt because we do not know in
instcombine whether a target will expand a sqrt call.
Note: we could say that the transform in IR should be restricted, but
that would not solve the problem if the source was originally in the
pattern shown here.
This is a gray area for fast-math-flag requirements. I think we should at
least check fast-math-flags on the fdiv and fmul because I view this
transform as 2 pieces: reassociate the fmul operands and form reciprocal
from the fdiv (as with the existing transform). We could argue that the
sqrt also needs FMF, but that was not required before, so we should change
that in a follow-up patch if that seems better.
We don't currently have a way to check that the target will produce a sqrt
or recip estimate without actually creating nodes (the APIs are SDValue
getSqrtEstimate() and SDValue getRecipEstimate()), so we clean up
speculatively created nodes if we are not able to create an estimate.
The x86 test with doubles verifies that we are not changing a test with
no estimate sequence.
Differential Revision: https://reviews.llvm.org/D82716
We need to ensure that the sign bits of the result all match
so we can't fold to undef.
Similar to PR46585.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D83163
zext_vector_inreg needs to produces 0s in the extended bits and
sext_vector_inreg needs to produce upper bits that are all the
same. So we should fold them to a 0 vector instead of undef.
Fixes PR46585.
There was a rogue 'assert' in AArch64ISelLowering for the tuple.get intrinsics,
that shouldn't really have been there (I suspect this was a remnant from when
we expected the wider vector always to have come from a vector CONCAT).
When I tried to create a more minimal reproducer, I found a bug in
DAGCombiner where it drops the scalable flag when trying to fold:
extract_subv (bitcast X), Index --> bitcast (extract_subv X, Index')
This patch fixes both issues.
Reviewers: david-arm, efriedma, spatel
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82910
In visitSCALAR_TO_VECTOR we try to optimise cases such as:
scalar_to_vector (extract_vector_elt %x)
into vector shuffles of %x. However, it led to numerous warnings
when %x is a scalable vector type, so for now I've changed the
code to only perform the combination on fixed length vectors.
Although we probably could change the code to work with scalable
vectors in certain cases, without a proper profit analysis it
doesn't seem worth it at the moment.
This change fixes up one of the warnings in:
llvm/test/CodeGen/AArch64/sve-merging-stores.ll
I've also added a simplified version of the same test to:
llvm/test/CodeGen/AArch64/sve-fp.ll
which already has checks for no warnings.
Differential Revision: https://reviews.llvm.org/D82872
As per documentation of `hasPairLoad`:
"`RequiredAlignment` gives the minimal alignment constraints that must be met to be able to select this paired load."
In this sense, `0` is strictly equivalent to `1`. We make this obvious by using `Align` instead of unsigned.
There is only one implementor of this interface.
Differential Revision: https://reviews.llvm.org/D82958
It's perfectly valid to do certain DAG combines where we extract
subvectors from a concat vector when we have scalable vector types.
However, we can do this in a way that avoids generating compiler
warnings by replacing calls to getVectorNumElements() with
getVectorMinNumElements(). Due to the way subvector extracts are
designed to work with scalable vector types this is ok.
This eliminates some warnings from existing tests in this file:
llvm/test/CodeGen/AArch64/sve-intrinsics-loads.ll
Differential Revision: https://reviews.llvm.org/D82655
When trying to reduce a BUILD_VECTOR to a SHUFFLE_VECTOR it's
important that we carefully check the vector types that led to
that BUILD_VECTOR. In the test I have attached to this commit
there is a case where the results of two SVE faddv instructions
are being stored to consecutive memory locations. With my fix,
as part of merging those stores we discover that each BUILD_VECTOR
element came from an extract of a SVE vector element and
therefore bail out.
Differential Revision: https://reviews.llvm.org/D82564
reduceBuildVecExtToExtBuildVec was breaking a splat(zext(x)) pattern into buildvector(x, 0, x, 0, ..) resulting in much more complex insert+shuffle codegen.
We already go to some lengths to avoid this in SimplifyDemandedVectorElts etc. when we encounter splat buildvectors.
It should be OK to fold all splat(aext(x)) patterns - we might need to tighten this if we find a case where we mustn't introduce a buildvector(x, undef, x, undef, ..) but I can't find one.
Fixes PR46461.
Summary:
- AssertAlign node records the guaranteed alignment on its source node,
where these alignments are retrieved from alignment attributes in LLVM
IR. These tracked alignments could help DAG combining and lowering
generating efficient code.
- In this patch, the basic support of AssertAlign node is added. So far,
we only generate AssertAlign nodes on return values from intrinsic
calls.
- Addressing selection in AMDGPU is revised accordingly to capture the
new (base + offset) patterns.
Reviewers: arsenm, bogner
Subscribers: jvesely, wdng, nhaehnle, tpr, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81711
For now I have changed SimplifyDemandedBits and it's various callers
to assume we know nothing for scalable vectors and to ignore the
demanded bits completely. I have also done something similar for
SimplifyDemandedVectorElts. These changes fix up lots of warnings
due to calls to EVT::getVectorNumElements() for types with scalable
vectors. These functions are all used for optimisations, rather than
functional requirements. In future we can revisit this code if
there is a need to improve code quality for SVE.
Differential Revision: https://reviews.llvm.org/D80537
Current implementation of division estimation isn't correct for some
cases like 1.0/0.0 (result is nan, not expected inf).
And this change exposes a potential infinite loop: we use
isConstOrConstSplatFP in combineRepeatedFPDivisors to look up if the
divisor is some constant. But it doesn't work after legalized on some
platforms. This patch restricts the method to act before LegalDAG.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D80542
If fmul and fadd are separated by an fma, we can fold them together
to save an instruction:
fadd (fma A, B, (fmul C, D)), N1 --> fma(A, B, fma(C, D, N1))
The fold implemented here is actually a specialization - we should
be able to peek through >1 fma to find this pattern. That's another
patch if we want to try that enhancement though.
This transform was guarded by the TLI hook enableAggressiveFMAFusion(),
so it was done for some in-tree targets like PowerPC, but not AArch64
or x86. The hook is protecting against forming a potentially more
expensive computation when fma takes longer to execute than a single
fadd. That hook may be needed for other transforms, but in this case,
we are replacing fmul+fadd with fma, and the fma should never take
longer than the 2 individual instructions.
'contract' FMF is all we need to allow this transform. That flag
corresponds to -ffp-contract=fast in Clang, so we are allowed to form
fma ops freely across expressions.
Differential Revision: https://reviews.llvm.org/D80801
Summary:
Note to downstream target maintainers: this might silently change the semantics of your code if you override `TargetLowering::allowsMemoryAccess` without marking it override.
This patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81379
D79003/rG9fa58d1bf2f8 exposed an issue with scalarizeBinOpOfSplats that we were extracting from the splatted vector result instead of the source, the splat index is only valid for the source vector not the result, which may contain undefs, including at the splat index.
This reverts commit 21dadd774f.
In at least PromoteIntBinOps, they wanted to know about users of *all* values
produced by the node not just the integer being promoted. For example not
replacing chain users if the operation was a load breaks the ordering of the
DAG.
This patch implements a target independent DAG combine to produce multiply-high
instructions from shifts. This DAG combine will combine shifts for any type as
long as the MULH on the narrow type is legal.
For now, it is enabled on PowerPC as PowerPC is the only target that has an
implementation of the isMulhCheaperThanMulShift TLI hook introduced in
D78271.
Moreover, this DAG combine focuses on catching the pattern:
(shift (mul (ext <narrow_type>:$a to <wide_type>), (ext <narrow_type>:$b to <wide_type>)), <narrow_width>)
to produce mulhs when we have a sign-extend, and mulhu when we have
a zero-extend.
The patch performs the following checks:
- Operation is a right shift arithmetic (sra) or logical (srl)
- Input to the shift is a multiply
- Both operands to the shift are sext/zext nodes
- The extends into the multiply are both the same
- The narrow type is half the width of the wide type
- The shift amount is the width of the narrow type
- The respective mulh operation is legal
Differential Revision: https://reviews.llvm.org/D78272
This code was repeated in two callers of CommitTargetLoweringOpt.
But CommitTargetLoweringOpt is also called from TargetLowering.
We should print a message for those calls to. So sink the
repeated code into CommitTargetLoweringOpt to catch those calls.
optimizations
As discussed in the thread http://lists.llvm.org/pipermail/llvm-dev/2020-May/141838.html,
some bit field access width can be reduced by ReduceLoadOpStoreWidth, some
can't. If two accesses are very close, and the first access width is reduced,
the second is not. Then the wide load of second access will be stalled for long
time.
This patch add command line options to guard ReduceLoadOpStoreWidth and
ShrinkLoadReplaceStoreWithStore, so users can use them to disable these
store width reduction optimizations.
Differential Revision: https://reviews.llvm.org/D80745
Currently combineInsertEltToShuffle turns insert_vector_elt into a
vector_shuffle, even if the inserted element is a vector with a single
element. In this case, it should be unlikely that the additional shuffle
would be more efficient than a insert_vector_elt.
Additionally, this fixes a infinite cycle in DAGCombine, where
combineInsertEltToShuffle turns a insert_vector_elt into a shuffle,
which gets turned back into a insert_vector_elt/extract_vector_elt by
a custom AArch64 lowering (in visitVECTOR_SHUFFLE).
Such insert_vector_elt and extract_vector_elt combinations can be
lowered efficiently using mov on AArch64.
There are 2 test changes in arm64-neon-copy.ll: we now use one or two
mov instructions instead of a single zip1. The reason that we need a
second mov in ins1f2 is that we have to move the result to the result
register and is not really related to the DAGCombine fold I think.
But in any case, on most uarchs, mov should be cheaper than zip1. On a
Cortex-A75 for example, zip1 is twice as expensive as mov
(https://developer.arm.com/docs/101398/latest/arm-cortex-a75-software-optimization-guide-v20)
Reviewers: spatel, efriedma, dmgreen, RKSimon
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D80710
I have tried to ensure that SelectionDAG and DAGCombiner do
sensible things for scalable vectors, and added support for a
limited number of simple folds. Codegen support for the vector
extract patterns have also been added to the AArch64 backend.
New vector extract tests have been added here:
CodeGen/AArch64/sve-extract-element.ll
and I have also added new folds using inserts and extracts here:
CodeGen/AArch64/sve-insert-element.ll
Differential Revision: https://reviews.llvm.org/D80208
binop (splat X), (splat C) --> splat (binop X, C)
binop (splat C), (splat X) --> splat (binop C, X)
We do this in IR, and there's a similar fold for the case with 2
non-constant operands just above the code diff in this patch.
This was discussed in D79718, and the extra shuffle in the test
(llvm/test/CodeGen/X86/vector-fshl-128.ll::sink_splatvar) where it
was noticed disappears because demanded elements analysis is no
longer blocked. The large majority of the test diffs seem to be
benign code scheduling changes, but I do see another type of win:
moving the splat later allows binop narrowing in some cases.
Regressions were avoided on x86 and ARM with the INSERT_VECTOR_ELT
restriction.
Differential Revision: https://reviews.llvm.org/D79886
This patch introduces a TargetLowering query, isMulhCheaperThanMulShift.
Currently in DAG Combine, it will transform mulhs/mulhu into a
wider multiply and a shift if the wide multiply is legal.
This TLI function is implemented on 64-bit PowerPC, as it is more desirable to
have multiply-high over multiply + shift for words and doublewords. Having
multiply-high can also aid in further transformations that can be done.
Differential Revision: https://reviews.llvm.org/D78271
Summary:
For some targets generic combines don't really do much and they
consume a disproportionate amount of time.
There's not really a mechanism in SDISel to tactically disable
combines, but we can have a switch to disable all of them and
let the targets just implement what they specifically need.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79112
This patch stores the alignment for ConstantPoolSDNode as an
Align and updates the getConstantPool interface to take a MaybeAlign.
Removing getAlignment() will be done as a follow up.
Differential Revision: https://reviews.llvm.org/D79436
Try to combine N short vector cast ops into 1 wide vector cast op:
concat (cast X), (cast Y)... -> cast (concat X, Y...)
This is part of solving PR45794:
https://bugs.llvm.org/show_bug.cgi?id=45794
As noted in the code comment, this is uglier than I was hoping because
the opcode determines whether we pass the source or destination type
to isOperationLegalOrCustom(). Also IIUC, there's no way to validate
what the other (dest or src) type is. Without the extra legality check
on that, there's an ARM regression test in:
test/CodeGen/ARM/isel-v8i32-crash.ll
...that will crash trying to lower an unsupported v8f32 to v8i16.
Differential Revision: https://reviews.llvm.org/D79360
