Summary:
The actual transform i was going after was:
https://rise4fun.com/Alive/Tp9H
```
Name: zz
Pre: isPowerOf2(C0) && isPowerOf2(C1) && C1 == C0
%t0 = and i8 %x, C0
%r = icmp eq i8 %t0, C1
=>
%t = icmp eq i8 %t0, 0
%r = xor i1 %t, -1
Name: zz
Pre: isPowerOf2(C0)
%t0 = and i8 %x, C0
%r = icmp ne i8 %t0, 0
=>
%t = icmp eq i8 %t0, 0
%r = xor i1 %t, -1
```
but as it can be seen from the current tests, we already canonicalize most of it,
and we are only missing handling multi-use non-canonical icmp predicates.
If we have both `!=0` and `==0`, even though we can CSE them,
we end up being stuck with them. We should canonicalize to the `==0`.
I believe this is one of the cleanup steps i'll need after `-scalarizer`
if i end up proceeding with my WIP alloca promotion helper pass.
Reviewers: spatel, jdoerfert, nikic
Reviewed By: nikic
Subscribers: zzheng, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83139
Sometimes SimplifyCFG may decide to perform jump threading. In order
to do it, it follows the following algorithm:
1. Checks if the block is small enough for threading;
2. If yes, inserts a PR Phi relying that the next iteration will remove it
by performing jump threading;
3. The next iteration checks the block again and performs the threading.
This logic has a corner case: inserting the PR Phi increases block's size
by 1. If the block size at first check was max possible, one more Phi will
exceed this size, and we will neither perform threading nor remove the
created Phi node. As result, we will end up with worse IR than before.
This patch fixes this situation by excluding Phis from block size computation.
Excluding Phis from size computation for threading also makes sense by
itself because in case of threadign all those Phis will be removed.
Differential Revision: https://reviews.llvm.org/D81835
Reviewed By: asbirlea, nikic
I'm not sure if this is a regression from D81448 + D81643,
which moved at least the code cast from elsewhere,
or somehow no one triggered that before.
But now we can reach it with a non-instruction..
It is not straight-forward to write cost-model tests for constantexprs,
`-cost-model -analyze -cost-kind=` does not appear to look at them,
or maybe i'm doing it wrong.
I've encountered that via a SimplifyCFG crash,
so reduced (currently-crashing) test is added.
There are likely other instances.
For now, simply restore previous status quo of
not crashing and returning TTI::TCC_Basic.
Summary:
According to HowToUpdateDebugInfo.rst:
```
Preserving the debug locations of speculated instructions can make
it seem like a condition is true when it's not (or vice versa), which
leads to a confusing single-stepping experience
```
This patch follows the recommendation to drop debug locations on
speculated instructions.
Reviewers: aprantl, davide
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82420
When an invoke instruction is converted to a call its
profile metadata is dropped because it has incompatible
format (see commit 16ad6eeb94).
This patch adds an attempt to convert profile data to
format of the call instruction. This used to work well
before the commit dcfa78a4cc.
Reviewers: reames
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82071
The invoke instruction can have profile metadata with branch_weights,
which does not make sense for a call instruction and will be
rejected by the verifier.
Differential revision: https://reviews.llvm.org/D81996
If the only user of `Instr` is in a return or unreachable block, we can
sink `Instr` to the`User` safely (unless it reads/writes memory).
Return or unreachable blocks are guaranteed to execute zero
or one time, and `Instr` always dominates `User`, so they either will
be executed together (execution of `User` always implies execution
of `Instr`) or not executed at all.
Differential Revision: https://reviews.llvm.org/D80120
Reviewed By: asbirlea, jdoerfert
If we don't know anything about the alignment of a pointer, Align(1) is
still correct: all pointers are at least 1-byte aligned.
Included in this patch is a bugfix for an issue discovered during this
cleanup: pointers with "dereferenceable" attributes/metadata were
assumed to be aligned according to the type of the pointer. This
wasn't intentional, as far as I can tell, so Loads.cpp was fixed to
stop making this assumption. Frontends may need to be updated. I
updated clang's handling of C++ references, and added a release note for
this.
Differential Revision: https://reviews.llvm.org/D80072
The "null-pointer-is-valid" attribute needs to be checked by many
pointer-related combines. To make the check more efficient, convert
it from a string into an enum attribute.
In the future, this attribute may be replaced with data layout
properties.
Differential Revision: https://reviews.llvm.org/D78862
For IR generated by a compiler, this is really simple: you just take the
datalayout from the beginning of the file, and apply it to all the IR
later in the file. For optimization testcases that don't care about the
datalayout, this is also really simple: we just use the default
datalayout.
The complexity here comes from the fact that some LLVM tools allow
overriding the datalayout: some tools have an explicit flag for this,
some tools will infer a datalayout based on the code generation target.
Supporting this properly required plumbing through a bunch of new
machinery: we want to allow overriding the datalayout after the
datalayout is parsed from the file, but before we use any information
from it. Therefore, IR/bitcode parsing now has a callback to allow tools
to compute the datalayout at the appropriate time.
Not sure if I covered all the LLVM tools that want to use the callback.
(clang? lli? Misc IR manipulation tools like llvm-link?). But this is at
least enough for all the LLVM regression tests, and IR without a
datalayout is not something frontends should generate.
This change had some sort of weird effects for certain CodeGen
regression tests: if the datalayout is overridden with a datalayout with
a different program or stack address space, we now parse IR based on the
overridden datalayout, instead of the one written in the file (or the
default one, if none is specified). This broke a few AVR tests, and one
AMDGPU test.
Outside the CodeGen tests I mentioned, the test changes are all just
fixing CHECK lines and moving around datalayout lines in weird places.
Differential Revision: https://reviews.llvm.org/D78403
We want to add a way to avoid merging identical calls so as to keep the
separate debug-information for those calls. There is also an asan
usecase where having this attribute would be beneficial to avoid
alternative work-arounds.
Here is the link to the feature request:
https://bugs.llvm.org/show_bug.cgi?id=42783.
`nomerge` is different from `noline`. `noinline` prevents function from
inlining at callsites, but `nomerge` prevents multiple identical calls
from being merged into one.
This patch adds `nomerge` to disable the optimization in IR level. A
followup patch will be needed to let backend understands `nomerge` and
avoid tail merge at backend.
Reviewed By: asbirlea, rnk
Differential Revision: https://reviews.llvm.org/D78659
Since intrinsics can now specify when an argument is required to be
constant, it is now OK to replace arguments with variables if they
aren't. This means intrinsics must now be accurately marked with
immarg.
On Powerpc fma is faster than fadd + fmul for some types,
(PPCTargetLowering::isFMAFasterThanFMulAndFAdd). we should implement target
hook isProfitableToHoist to prevent simplifyCFGpass from breaking fma
pattern by hoisting fmul to predecessor block.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D76207
SimplifyCFG should not merge empty return blocks and leave a CallBr behind
with a duplicated destination since the verifier will then trigger an
assert. This patch checks for this case and avoids the transformation.
CodeGenPrepare has a similar check which also has a FIXME comment about why
this is needed. It seems perhaps better if these two passes would eventually
instead update the CallBr instruction instead of just checking and avoiding.
This fixes https://bugs.llvm.org/show_bug.cgi?id=45062.
Review: Craig Topper
Differential Revision: https://reviews.llvm.org/D75620
When InstCombine initially populates the worklist, it already
performs constant folding and DCE. However, as the instructions
are initially visited in program order, this DCE can pick up only
the last instruction of a dead chain, the rest would only get
picked up in the main InstCombine run.
To avoid this, we instead perform the DCE in separate pass over the
collected instructions in reverse order, which will allow us to
pick up full dead instruction chains. We already need to do this
reverse iteration anyway to populate the worklist, so this
shouldn't add extra cost.
This by itself only fixes a small part of the problem though:
The same basic issue also applies during the main InstCombine loop.
We generally always want DCE to occur as early as possible,
because it will allow one-use folds to happen. Address this by also
performing DCE while adding deferred instructions to the main worklist.
This drops the number of tests that perform more than 2 InstCombine
iterations from ~80 to ~40. There's some spurious test changes due
to operand order / icmp toggling.
Differential Revision: https://reviews.llvm.org/D75008
This reverts commit 61b35e4111.
This commit causes a timeout in chromium builds; likely to have a
similar cause to the previous timeout issue caused by this commit (see
6ded69f294 for more details). It is possible that there is no way to
fix this bug that will not cause this issue; further investigations as
to the efficiency of handling large amounts of debug info will be
necessary.
This reverts commit 636c93ed11.
The original patch caused build failures on TSan buildbots. Commit 6ded69f294
fixes this issue by reducing the rate at which empty debug intrinsics
propagate, reducing the memory footprint and preventing a fatal spike.
This fixes a bug where a PHI node that is only referenced by a lifetime.end intrinsic in an otherwise empty cleanuppad can cause SimplyCFG to create an SSA violation while removing the empty cleanuppad. Theoretically the same problem can occur with debug intrinsics.
Differential Revision: https://reviews.llvm.org/D72540
Summary:
In commit d60f34c20a (llvm-svn 317128,
PR35113) MergeBlockIntoPredecessor was changed into
discarding some dbg.value intrinsics referring to
PHI values, post-splice due to loop rotation.
That elimination of dbg.value intrinsics did not
consider which dbg.value to keep depending on the
context (e.g. if the variable is changing its value
several times inside the basic block).
In the past that hasn't been such a big problem since
CodeGenPrepare::placeDbgValues has moved the dbg.value
to be next to the PHI node anyway. But after commit
00e238896c CodeGenPrepare isn't doing that
any longer, so we need to be more careful when avoiding
duplicate dbg.value intrinsics in MergeBlockIntoPredecessor.
This patch replaces the code that tried to avoid duplicate
dbg.values by using the RemoveRedundantDbgInstrs helper.
Reviewers: aprantl, jmorse, vsk
Reviewed By: aprantl, vsk
Subscribers: jholewinski, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71480
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
This fixes the buildbot failures.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
GEP index size can be specified in the DataLayout, introduced in D42123. However, there were still places
in which getIndexSizeInBits was used interchangeably with getPointerSizeInBits. This notably caused issues
with Instcombine's visitPtrToInt; but the unit tests was incorrect, so this remained undiscovered.
Differential Revision: https://reviews.llvm.org/D68328
Patch by Joseph Faulls!
basic blocks
Originally applied in 72ce759928.
Fixed a build failure caused by incorrect use of cast instead of
dyn_cast.
This reverts commit 8b0780f795.
When basic blocks are killed, either due to being empty or to being an if.then
or if.else block whose complement contains identical instructions, some of the
debug intrinsics in that block are lost. This patch sinks those intrinsics
into the single successor block, setting them Undef if necessary to
prevent debug info from falling out-of-date.
Differential Revision: https://reviews.llvm.org/D70318
As a reminder, a "widenable branch" is the pattern "br i1 (and i1 X, WC()), label %taken, label %untaken" where "WC" is the widenable condition intrinsics. The semantics of such a branch (derived from the semantics of WC) is that a new condition can be added into the condition arbitrarily without violating legality.
Broaden the definition in two ways:
Allow swapped operands to the br (and X, WC()) form
Allow widenable branch w/trivial condition (i.e. true) which takes form of br i1 WC()
The former is just general robustness (e.g. for X = non-instruction this is what instcombine produces). The later is specifically important as partial unswitching of a widenable range check produces exactly this form above the loop.
Differential Revision: https://reviews.llvm.org/D70502
Similar to/extension of D70208 (rGee0882bdf866), but this one
may finally allow closing motivating bugs.
This is another step towards having FMF apply only to FP values
rather than those + fcmp. See PR38086 for one of the original
discussions/motivations:
https://bugs.llvm.org/show_bug.cgi?id=38086
And the test here is derived from PR39535:
https://bugs.llvm.org/show_bug.cgi?id=39535
Currently, we lose FMF when converting any phi to select in
SimplifyCFG. There are a small number of similar changes needed
to correct within SimplifyCFG, so it should be quick to patch
this pass up.
FMF was extended to select and phi with:
D61917
D67564
It doesn't seem that there are any perf/param knobs that can be turned
to create selects for the FP variants of the tests, but that may not
always be true in the future. If it changes, we should propagate FMF.
This is another step towards having FMF apply only to FP values
rather than those + fcmp. See PR38086 for one of the original
discussions/motivations:
https://bugs.llvm.org/show_bug.cgi?id=38086
And the test here is derived from PR39535:
https://bugs.llvm.org/show_bug.cgi?id=39535
Currently, we lose FMF when converting any phi to select in
SimplifyCFG. There are a small number of similar changes needed
to correct within SimplifyCFG, so it should be quick to patch
this pass up.
FMF was extended to select and phi with:
D61917
D67564
Differential Revision: https://reviews.llvm.org/D70208
