A section of ObjectFileMachO is ifdef compiled only when
building to run on iOS etc natively, so this old method
call rename wasn't detected by normal on-mac building.
Recognize the visionOS Triple::OSType::XROS os type. Some of these have
already been landed on main, but I reviewed the downstream sources and
there were a few that still needed to be landed upstream.
Lots of code around LLDB was directly accessing the target's section
load list. This NFC patch makes the section load list private so the
Target class can access it, but everyone else now uses accessor
functions. This allows us to control the resolving of addresses and will
allow for functionality in LLDB which can lazily resolve addresses in
JIT plug-ins with a future patch.
Note that PointerUnion::{is,get} have been soft deprecated in
PointerUnion.h:
// FIXME: Replace the uses of is(), get() and dyn_cast() with
// isa<T>, cast<T> and the llvm::dyn_cast<T>
In #119598 my recent TLS feature seems to break crashpad symbols. I have
a few ideas on how this is happening, but for now as a mitigation I'm
checking if the Minidump was LLDB generated, and if so leveraging the
dynamic loader.
Compared to the python version, this also does type checking and error
handling, so it's slightly longer, however, it's still comfortably
under 500 lines.
Relanding with more explicit type conversions.
This reverts commit f6012a209d.
Revert "[lldb] Add cast to fix compile error on 32-but platforms"
This reverts commit d300337e93.
Revert "[lldb] Improve log message to include missing strings"
This reverts commit 0be3348485.
Revert "[lldb] Add comment"
This reverts commit e2bb47443d.
Revert "[lldb] Implement a formatter bytecode interpreter in C++"
This reverts commit 9a9c1d4a61.
Compared to the python version, this also does type checking and error
handling, so it's slightly longer, however, it's still comfortably
under 500 lines.
Add support for type summaries embedded into the binary.
These embedded summaries will typically be generated by Swift macros,
but can also be generated by any other means.
rdar://115184658
The Mach-O load commands have an LC_SYMTAB / struct symtab_command which
represents the offset of the symbol table (nlist records) and string
table for this binary. In a mach-o binary on disk, these are file
offsets. If a mach-o binary is loaded in memory with all segments
consecutive, the `symoff` and `stroff` are the offsets from the TEXT
segment (aka the mach-o header) virtual address to the virtual address
of the start of these tables.
However, if a Mach-O binary is a part of the shared cache, then the
segments will be separated -- they will have different slide values. And
it is possible for the LINKEDIT segment to be greater than 4GB away from
the TEXT segment in the virtual address space, so these 32-bit offsets
cannot express the offset from TEXT segment to these tables.
Create separate uint64_t variables to track the offset to the symbol
table and string table, instead of reusing the 32-bit ones in the
symtab_command structure.
rdar://140432279
I backed this out due to a problem on one of the bots that myself and
others have problems reproducing locally. I'd like to try to land it
again, at least to gain more information.
Summary:
This improves the performance of ObjectFileMacho::ParseSymtab by
removing eager and expensive work in favor of doing it later in a
less-expensive fashion.
Experiment:
My goal was to understand LLDB's startup time.
First, I produced a Debug build of LLDB (no dSYM) and a
Release+NoAsserts build of LLDB. The Release build debugged the Debug
build as it debugged a small C++ program. I found that
ObjectFileMachO::ParseSymtab accounted for somewhere between 1.2 and 1.3
seconds consistently. After applying this change, I consistently
measured a reduction of approximately 100ms, putting the time closer to
1.1s and 1.2s on average.
Background:
ObjectFileMachO::ParseSymtab will incrementally create symbols by
parsing nlist entries from the symtab section of a MachO binary. As it
does this, it eagerly tries to determine the size of symbols (e.g. how
long a function is) using LC_FUNCTION_STARTS data (or eh_frame if
LC_FUNCTION_STARTS is unavailable). Concretely, this is done by
performing a binary search on the function starts array and calculating
the distance to the next function or the end of the section (whichever
is smaller).
However, this work is unnecessary for 2 reasons:
1. If you have debug symbol entries (i.e. STABs), the size of a function
is usually stored right after the function's entry. Performing this work
right before parsing the next entry is unnecessary work.
2. Calculating symbol sizes for symbols of size 0 is already performed
in `Symtab::InitAddressIndexes` after all the symbols are added to the
Symtab. It also does this more efficiently by walking over a list of
symbols sorted by address, so the work to calculate the size per symbol
is constant instead of O(log n).
Resubmissions of https://github.com/llvm/llvm-project/pull/112596 with
buildbot fixes.
Allow LLDB to parse the dynamic symbol table from an ELF file or memory
image in an ELF file that has no section headers. This patch uses the
ability to parse the PT_DYNAMIC segment and find the DT_SYMTAB,
DT_SYMENT, DT_HASH or DT_GNU_HASH to find and parse the dynamic symbol
table if the section headers are not present. It also adds a helper
function to read data from a .dynamic key/value pair entry correctly
from the file or from memory.
Allow LLDB to parse the dynamic symbol table from an ELF file or memory
image in an ELF file that has no section headers. This patch uses the
ability to parse the PT_DYNAMIC segment and find the DT_SYMTAB,
DT_SYMENT, DT_HASH or DT_GNU_HASH to find and parse the dynamic symbol
table if the section headers are not present. It also adds a helper
function to read data from a .dynamic key/value pair entry correctly
from the file or from memory.
This patch adds desired feature flags in JIT compiler to enable
hard-float instructions if target supports them and allows to use floats
and doubles in lldb expressions.
Fited tests:
lldb-shell :: Expr/TestAnonNamespaceParamFunc.cpp
lldb-shell :: Expr/TestIRMemoryMap.test
lldb-shell :: Expr/TestStringLiteralExpr.test
lldb-shell :: SymbolFile/DWARF/debug-types-expressions.test
Similar as #99336
Depens on: https://github.com/llvm/llvm-project/pull/114741
Reviewed By: SixWeining
Pull Request: https://github.com/llvm/llvm-project/pull/114742
Recently my coworker @jeffreytan81 pointed out that Minidumps don't show
breakpoints when collected. This was prior blocked because Minidumps
could only contain 1 exception, now that we support N signals/sections
we can save all the threads stopped on breakpoints.
In my prior two save core API's, I experimented on how to save stacks
with the new API. I incorrectly left these in, as the existing
`m_thread_by_range_end` was the correct choice.
I have removed the no-op collection, and moved to use the proper one.
It's worth noting this was not caught by testing because we do not
verify where the items are contained in the minidump. This would require
a test being aware of how minidumps are structured, or adding a textual
tool that we can then scan the output of.
Summary:
This improves the performance of ObjectFileMacho::ParseSymtab by
removing eager and expensive work in favor of doing it later in a
less-expensive fashion.
Experiment:
My goal was to understand LLDB's startup time.
First, I produced a Debug build of LLDB (no dSYM) and a
Release+NoAsserts build of LLDB. The Release build debugged the Debug
build as it debugged a small C++ program. I found that
ObjectFileMachO::ParseSymtab accounted for somewhere between 1.2 and 1.3
seconds consistently. After applying this change, I consistently
measured a reduction of approximately 100ms, putting the time closer to
1.1s and 1.2s on average.
Background:
ObjectFileMachO::ParseSymtab will incrementally create symbols by
parsing nlist entries from the symtab section of a MachO binary. As it
does this, it eagerly tries to determine the size of symbols (e.g. how
long a function is) using LC_FUNCTION_STARTS data (or eh_frame if
LC_FUNCTION_STARTS is unavailable). Concretely, this is done by
performing a binary search on the function starts array and calculating
the distance to the next function or the end of the section (whichever
is smaller).
However, this work is unnecessary for 2 reasons:
1. If you have debug symbol entries (i.e. STABs), the size of a function
is usually stored right after the function's entry. Performing this work
right before parsing the next entry is unnecessary work.
2. Calculating symbol sizes for symbols of size 0 is already performed
in `Symtab::InitAddressIndexes` after all the symbols are added to the
Symtab. It also does this more efficiently by walking over a list of
symbols sorted by address, so the work to calculate the size per symbol
is constant instead of O(log n).
In #95312 Minidump file creation was moved from being created at the
end, to the file being emitted in chunks. This causes some undesirable
behavior where the file can still be present after an error has
occurred. To resolve this we will now delete the file upon an error.
Recently in #107731 this change was revereted due to excess memory size
in `TestSkinnyCore`. This was due to a bug where a range's end was being
passed as size. Creating massive memory ranges.
Additionally, and requiring additional review, I added more unit tests
and more verbose logic to the merging of save core memory regions.
@jasonmolenda as an FYI.
Reapplies #106293, testing identified issue in the merging code. I used
this opportunity to strip CoreFileMemoryRanges to it's own file and then
add unit tests on it's behavior.
A follow up to #106473 Minidump wasn't collecting fs or gs_base. This
patch extends the x86_64 register context and gated reading it behind an
lldb specific flag. Additionally these registers are explicitly checked
in the tests.
This patch addresses a bug where `cs`/`fs` and other segmentation flags
were being identified as having a type of `32b` and `64b` for `rflags`.
In that case the register value was returning the fail value `0xF...`
and this was corrupting some minidumps. Here we just read it as a 64b
value and truncate it.
In addition to that fix, I added comparing the registers from the live
process to the loaded core for the generic minidump test. Prior only
being ARM register tests. This explains why this was not detected
before.
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
This patch adds the option to specify specific memory ranges to be
included in a given core file. The current implementation lets user
specified ranges either be in addition to a certain save style, or
independent of them via the newly added custom enum.
To achieve being inclusive of save style, I've moved from a std::vector
of ranges to a RangeDataVector, and to join overlapping ranges to
prevent duplication of memory ranges in the core file.
As a non function bonus, when SBSavecore was initially created, the
header was included in the lldb-private interfaces, and I've fixed that
and moved it the forward declare as an oversight. CC @bulbazord in case
we need to include that into swift.
This PR is in response to a bug my coworker @mbucko discovered where on
MacOS Minidumps were being created where the 64b memory regions were
readable, but were not being listed in
`SBProcess.GetMemoryRegionList()`. This went unnoticed in #95312 due to
all the linux testing including /proc/pid maps. On MacOS generated dumps
(or any dump without access to /proc/pid) we would fail to properly map
Memory Regions due to there being two independent methods for 32b and
64b mapping.
In this PR I addressed this minor bug and merged the methods, but in
order to add test coverage required additions to `obj2yaml` and
`yaml2obj` which make up the bulk of this patch.
Lastly, there are some non-required changes such as the addition of the
`Memory64ListHeader` type, to make writing/reading the header section of
the Memory64List easier.
This PR is in reference to porting LLDB on AIX.
Link to discussions on llvm discourse and github:
1. https://discourse.llvm.org/t/port-lldb-to-ibm-aix/80640
2. #101657
The complete changes for porting are present in this draft PR:
https://github.com/llvm/llvm-project/pull/102601
The changes on this PR are intended to avoid namespace collision for
certain typedefs between lldb and other platforms:
1. tid_t --> lldb::tid_t
2. offset_t --> lldb::offset_t
Reapply #100443 and #101770. These were originally reverted due to a
test failure and an MSAN failure. I changed the test attribute to
restrict to x86 (following the other existing tests). I could not
reproduce the test or the MSAN failure and no repo steps were provided.
This patch improves the ability of a ObjectFileELF instance to read the
.dynamic section. It adds the ability to read the .dynamic section from
the PT_DYNAMIC program header which is useful for ELF files that have no
section headers and for ELF files that are read from memory. It cleans
up the usage of the .dynamic entries so that
ObjectFileELF::ParseDynamicSymbols() is the only code that parses
.dynamic entries, teaches that function the read and store the string
values for each .dynamic entry. We now dump the .dynamic entries in the
output of "image dump objfile". It also cleans up the code that gets the
dynamic string table so that it can grab it from the DT_STRTAB and
DT_STRSZ .dynamic entries for when we have a ELF file with no section
headers or we are reading it from memory.
This fixes the following:
```
[6603/7618] Building CXX object
tools\lldb\source\Plugins\ObjectFile\PECOFF\CMakeFiles\lldbPluginObjectFilePECOFF.dir\WindowsMiniDump.cpp.obj
C:\src\git\llvm-project\lldb\source\Plugins\ObjectFile\PECOFF\WindowsMiniDump.cpp(29,25):
warning: object backing the pointer will be destroyed at the end of the
full-expression [-Wdangling-gsl]
29 | const auto &outfile = core_options.GetOutputFile().value();
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
```
This patch improves the ability of a ObjectFileELF instance to read the .dynamic section. It adds the ability to read the .dynamic section from the PT_DYNAMIC program header which is useful for ELF files that have no section headers and for ELF files that are read from memory. It cleans up the usage of the .dynamic entries so that ObjectFileELF::ParseDynamicSymbols() is the only code that parses .dynamic entries, teaches that function the read and store the string values for each .dynamic entry. We now dump the .dynamic entries in the output of "image dump objfile". It also cleans up the code that gets the dynamic string table so that it can grab it from the DT_STRTAB and DT_STRSZ .dynamic entries for when we have a ELF file with no section headers or we are reading it from memory.
In #100443, Mach-o and Minidump now only call process API's that take a
`SaveCoreOption` as the container for the style and information if a
thread should be included in the core or not. This introduced a bug
where in subsequent method calls we were not honoring the defaults of
both implementations.
~~To solve this I have made a copy of each SaveCoreOptions that is
mutable by the respective plugin. Originally I wanted to leave the
SaveCoreOptions as non const so these default value mutations could be
shown back to the user. Changing that behavior is outside of the scope
of this bugfix, but is context for why we are making a copy.~~
Removed const on the savecoreoptions so defaults can be inspected by the
user
CC: @Michael137
In #98403 I enabled the SBSaveCoreOptions object, which allows users via
the scripting API to define what they want saved into their core file.
As the first option I've added a threadlist, so users can scan and
identify which threads and corresponding stacks they want to save.
In order to support this, I had to add a new method to `Process.h` on
how we identify which threads are to be saved, and I had to change the
book keeping in minidump to ensure we don't double save the stacks.
Important to @jasonmolenda I also changed the MachO coredump to accept
these new APIs.
Prevent passing a nullptr to std::string::insert in
ObjectFileMachO::GetDependentModules. Calling GetCString on an empty
ConstString will return a nullptr, which is undefined behavior. Instead,
use the GetString helper which will return an empty string in that case.
rdar://132388027
.sbss section was recognized as eSectionTypeOther, but has to be
eSectionTypeZeroFill.
Fixed tests for RISCV target:
TestClassLoadingViaMemberTypedef.TestCase
TestClassTemplateNonTypeParameterPack.TestCaseClassTemplateNonTypeParameterPack
TestThreadSelectionBug.TestThreadSelectionBug
lldbsuite.test.lldbtest.TestOffsetof
lldbsuite.test.lldbtest.TestOffsetofCpp
TestTargetDumpTypeSystem.TestCase
TestCPP11EnumTypes.CPP11EnumTypesTestCase
TestCppIsTypeComplete.TestCase
TestExprCrash.ExprCrashTestCase
TestDebugIndexCache.DebugIndexCacheTestcase
