This patch considers the CU index entry
when reading the .debug_rnglists.dwo section.
Reviewed By: jankratochvil
Differential Revision: https://reviews.llvm.org/D107456
Due to CMake cache, find_package in FindLuaAndSwig.cmake
will be ignored. This commit adds EXACT and REQUIRED flags
to it and removes find_package in Lua ScriptInterpreter.
Signed-off-by: Siger Yang <sigeryeung@gmail.com>
Reviewed By: tammela, JDevlieghere
Differential Revision: https://reviews.llvm.org/D108515
Implement a new target.process.follow-fork-mode setting to control
LLDB's behavior on fork. If set to 'parent', the forked child is
detached and parent continues being traced. If set to 'child',
the parent is detached and child becomes traced instead.
Differential Revision: https://reviews.llvm.org/D100503
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
This relands commit aafa05e, reverted in 1f986f6.
Failed tests were fixed.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
Temporarily remove breakpoints for the duration of vfork, in order
to prevent them from triggering in the child process. Restore them
once the server reports that vfork has finished and it is ready to
resume execution.
Differential Revision: https://reviews.llvm.org/D100267
Temporarily remove breakpoints for the duration of vfork, in order
to prevent them from triggering in the child process. Restore them
once the server reports that vfork has finished and it is ready to
resume execution.
Differential Revision: https://reviews.llvm.org/D100267
Remove software breakpoints from forked processes in order to restore
the original program code before detaching it.
Differential Revision: https://reviews.llvm.org/D100263
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
When adding a dSYM to a Module and it has different file addresses
from the already-present ObjectFile binary, change the Sections to
use the dSYM's file addresses so the symbol table and DWARF are
properly contained in the Sections. Previously this was only done
for IsInMemory ObjectFiles, but it's more common than that.
Differential Revision: https://reviews.llvm.org/D108889
rdar://81504400
Add a support for handling fork/vfork stops in LLGS client. At this
point, it only sends a detach packet for the newly forked child
(and implicitly resumes the parent).
Differential Revision: https://reviews.llvm.org/D100206
added new command "process trace save -d <directory>".
-it saves a JSON file as <directory>/trace.json, with the main properties of the trace session.
-it saves binary Intel-pt trace as <directory>/thread_id.trace; each file saves each thread.
-it saves modules to the directory <directory>/modules .
-it only works for live process and it only support Intel-pt right now.
Example:
```
b main
run
process trace start
n
process trace save -d /tmp/mytrace
```
A file named trace.json and xxx.trace should be generated in /tmp/mytrace. To load the trace that was just saved:
```
trace load /tmp/mytrace
thread trace dump instructions
```
You should see the instructions of the trace got printed.
To run a test:
```
cd ~/llvm-sand/build/Release/fbcode-x86_64/toolchain
ninja lldb-dotest
./bin/lldb-dotest -p TestTraceSave
```
Reviewed By: wallace
Differential Revision: https://reviews.llvm.org/D107669
I was debugging a problem and noticed that it would have been helpful to have
the type of each FieldDecl when looking at the output from
ClangASTSource::layoutRecordType.
Differential Revision: https://reviews.llvm.org/D108257
This patch removed some typos from NativeRegisterContextLinux_arm and
NativeRegisterContextLinux_arm64. Some of the log/error messages were
being reported as x86_64.
Module::LookupInfo's constructor currently goes over supported languages
trying to figure out the best way to search for a symbol name. This
seems like a great candidate for refactoring. Specifically, this is work
that can be delegated to language plugins.
Once again, the goal here is to further decouple plugins from
non-plugins. The idea is to have each language plugin take a name and
give you back some information about the name from the perspective of
the language. Specifically, each language now implements a
`GetFunctionNameInfo` method which returns an object of type
`Language::FunctionNameInfo`. Right now, it consists of a basename,
a context, and a FunctionNameType. Module::LookupInfo's constructor will
call `GetFunctionNameInfo` with the appropriate language plugin(s) and
then decide what to do with that information. I have attempted to maintain
existing behavior as best as possible.
A nice side effect of this change is that lldbCore no longer links
against the ObjC Language plugin.
Differential Revision: https://reviews.llvm.org/D108229
Fix D98289 so that it works even for 2nd..nth compilation unit
(.debug_rnglists).
Reviewed By: dblaikie, ikudrin
Differential Revision: https://reviews.llvm.org/D106466
On aarch64 a two instruction sequence is used to calculate a
pc-relative address, add some state to the DisassemblerLLVMC
symbolicator so it can track the necessary data across the
two instructions and compute the address being calculated.
Differential Revision: https://reviews.llvm.org/D107213
rdar://49119253
Follow up on https://reviews.llvm.org/D105741
- Add new test that exhaustively checks the output file's content
- Fix typos in documentation and other minor fixes
Reviewed By: wallace
Original Author: jj10306
Differential Revision: https://reviews.llvm.org/D107674
These two tests, TestSkinnyCorefile.py and TestStackCorefile.py,
require a new debugserver on darwin systems to run correctly; for now,
skip them if the system debugserver is in use. There's no easy way to
test if the debugserver being used supports either of these memory
region info features. For end users, the fallback will be a full
corefile and that's not the worst thing, but for the tests it is a
problem.
Add a field to the qMemoryRegionInfo packet where the remote stub
can describe the type of memory -- heap, stack. Keep track of
memory regions that are stack memory in lldb. Add a new "--style
stack" to process save-core to request that only stack memory be
included in the corefile.
Differential Revision: https://reviews.llvm.org/D107625
Skeleton vs. DWO units mismatch has been fixed in D106270. As they both
have type DWARFUnit it is a bit difficult to debug. So it is better to
make it safe against future changes.
Reviewed By: kimanh, clayborg
Differential Revision: https://reviews.llvm.org/D107659
When going through the CU entries in the name index,
make sure to compare the name entry's CU
offset against the skeleton CU's offset.
Previously there would be a mismatch, since the
wrong offset was compared, and thus no suitable
entry was found.
Reviewed By: jankratochvil
Differential Revision: https://reviews.llvm.org/D106270
Use hexadecimal numbers rather than decimal in various vFile packets
in order to fix compatibility with gdbserver. This also changes the few
custom LLDB packets -- while technically they do not have to be changed,
it is easier to use the same syntax consistently across LLDB.
Differential Revision: https://reviews.llvm.org/D107475
Sync the mode constants used to drive vFile:open requests with these
used by GDB and defined for the gdb remote protocol. This makes it
possible to use 'platform file open' after connecting to gdbremote
server (and to some degree to operate on the open file modulo other
incompatibilities).
Differential Revision: https://reviews.llvm.org/D106985
Modify OpenOptions enum to open the future path into synchronizing
vFile:open bits with GDB. Currently, LLDB and GDB use different flag
models effectively making it impossible to match bits. Notably, LLDB
uses two bits to indicate read and write status, and uses union of both
for read/write. GDB uses a value of 0 for read-only, 1 for write-only
and 2 for read/write.
In order to future-proof the code for the GDB variant:
1. Add a distinct eOpenOptionReadWrite constant to be used instead
of (eOpenOptionRead | eOpenOptionWrite) when R/W access is required.
2. Rename eOpenOptionRead and eOpenOptionWrite to eOpenOptionReadOnly
and eOpenOptionWriteOnly respectively, to make it clear that they
do not mean to be combined and require update to all call sites.
3. Use the intersection of all three flags when matching against
the three possible values.
This commit does not change the actual bits used by LLDB.
Differential Revision: https://reviews.llvm.org/D106984
Move Objective-C constants into ObjCConstants.h and share them between
Cocoa and AppleObjCTypeEncodingParser.
Differential revision: https://reviews.llvm.org/D107679
Upstream support for NSConstantArray, NSConstantIntegerNumber,
NSConstant{Float,Double}Number and NSConstantDictionary.
We would've upstreamed this earlier but testing it requires
-fno-constant-nsnumber-literals, -fno-constant-nsarray-literals and
-fno-constant-nsdictionary-literals which haven't been upstreamed yet.
As a temporary workaround use the system compiler (xcrun clang) for the
constant variant of the tests.
I'm just upstreaming this. The patch and the tests were all authored by
Fred Riss.
Differential revision: https://reviews.llvm.org/D107660
This reverts commit 34d78b6a67.
This breaks build bots witha missing file:
/home/worker/2.0.1/lldb-x86_64-debian/llvm-project/lldb/source/Plugins/Language/ObjC/Cocoa.cpp:10:10: fatal error: 'objc/runtime.h' file not found
The pointer to the dyld trie data structure which lldb needs to parse to get
"trampoline kinds" on Darwin used to be a field in the LC_DYLD_INFO load command. A
new load command was added recently dedicated to this purpose: LC_DYLD_EXPORTS_TRIE.
The format of the trie did not change, however. So all we have to do is use the new
command if present. The commands are supposed to be mutually exclusive, so I added
an lldb_assert to warn if they are not.
Differential Revision: https://reviews.llvm.org/D107673
Upstream support for NSConstantArray, NSConstantIntegerNumber,
NSConstant{Float,Double}Number and NSConstantDictionary.
We would've upstreamed this earlier but testing it requires
-fno-constant-nsnumber-literals, -fno-constant-nsarray-literals and
-fno-constant-nsdictionary-literals which haven't been upstreamed yet.
As a temporary workaround use the system compiler (xcrun clang) for the
constant variant of the tests.
I'm just upstreaming this. The patch and the tests were all authored by
Fred Riss.
Differential revision: https://reviews.llvm.org/D107660
It looks like recent CoreFoundation builds strip the non-public symbol
that we were looking for to find the 2 boolean "classes". The public
symbol is of course there, and it contains the address of the private
one. If we don't find the private symbol directly, go through a memory
read at the public symbol's location instead.
Rather than passing two booleans around, which is especially error prone
with them being next to each other, use a struct with named fields
instead.
Differential revision: https://reviews.llvm.org/D107295
lldb_private::DataExtractor contains DataBufferSP m_data_sp which is
relatively expensive to copy (due to multi-threading locking).
llvm::DataExtractor does not have this problem as it uses StringRef
instead.
The copy constructor is explicit as otherwise it is easy to make
unintended modification of a local copy instead of a caller's instance
(D107470 but that is llvm::DataExtractor).
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D107485
Summary:
In the spirit of https://reviews.llvm.org/D70846, we only return functions with
matching mangled name from Apple/DebugNamesDWARFIndex::GetFunction if
eFunctionNameTypeFull is requested.
This speeds up lookup in the presence of large amount of class methods of the
same name (a typical examples would be constructors of templates with many
instantiations or overloaded operators).
Reviewers: labath, teemperor
Reviewed By: labath, teemperor
Subscribers: aprantl, arphaman, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D73191
This patch fixes the lookup of locations in
.debug_loclists, if they are split in a .dwp file.
Mainly, we need to consider the cu index offsets.
Reviewed By: jankratochvil
Differential Revision: https://reviews.llvm.org/D107161
As pointed out in D107434 by Walter, D103172 also changed two for loops that
were actually not just iterating over some DIEs but also using the iteration
variable later on for some other things. This patch reverts the respective
faulty parts of D103172.
LLVM includes this header unconditionally on all platforms
(including Windows), so this define should no longer be necessary.
No behavior change.
Differential Revision: https://reviews.llvm.org/D107338
