TargetProperties.td had a few settings listed as signed integral values,
but the Target.cpp methods reading those values were reading them as
unsigned. e.g. target.max-memory-read-size, some accesses of
target.max-children-count, still today, previously
target.max-string-summary-length.
After Jonas' change to use templates to read these values in
https://reviews.llvm.org/D149774, when the code tried to fetch these
values, we'd eventually end up calling OptionValue::GetAsUInt64 which
checks that the value is actually a UInt64 before returning it; finding
that it was an SInt64, it would drop the user setting and return the
default value. This manifested as a bug that target.max-memory-read-size
is never used for memory read.
target.max-children-count is less straightforward, where one read of
that setting was fetching it as an int64_t, the other as a uint64_t.
I suspect all of these settings were originally marked as SInt64 so a
user could do -1 for "infinite", getting it static_cast to a UINT64_MAX
value along the way. I can't find any documentation for this behavior,
but it seems like something Greg would have done. We've partially lost
that behavior already via
https://github.com/llvm/llvm-project/pull/72233 for
target.max-string-summary-length, and this further removes it.
We're still fetching UInt64's and returning them as uint32_t's but I'm
not overly pressed about someone setting a count/size limit over 4GB.
I added a simple API test for the memory read setting limit.
This introduces a `target.object-map` which allows us to remap module
locations, much in the same way as source mapping works today. This is
useful, for instance, when debugging coredumps, so we can replace some
of the locations where LLDB attempts to load shared libraries and
executables from, without having to setup an entire sysroot.
For the significant amount of call sites that want to create an
incontrovertible error, such a wrapper function creates a significant
readability improvement and lowers the cost of entry to add error
handling in more places.
This commit addresses issue #87244, where a redundant condition was
found in the Target.cpp file. Static analyzer cppcheck flagged the issue
in the Target.cpp file
fix#87244
that separates out language and version. To avoid reinventing the wheel
and introducing subtle incompatibilities, this API uses the table of
languages and versiond defined by the upcoming DWARF 6 standard
(https://dwarfstd.org/languages-v6.html). While the DWARF 6 spec is not
finialized, the list of languages is broadly considered stable.
The primary motivation for this is to allow the Swift language plugin to
switch between language dialects between, e.g., Swift 5.9 and 6.0 with
out introducing a ton of new language codes. On the main branch this
change is considered NFC.
Depends on https://github.com/llvm/llvm-project/pull/89980
These are hardcoded strings that are already present in the data section
of the binary, no need to immediately place them in the ConstString
StringPools. Lots of code still calls `GetBroadcasterClass` and places
the return value into a ConstString. Changing that would be a good
follow-up.
Additionally, calls to these functions are still wrapped in ConstStrings
at the SBAPI layer. This is because we must guarantee the lifetime of
all strings handed out publicly.
In Swift's downstream lldb, there are a number of experimental properties. This change
extracts a getter function containing the common logic for getting a boolean valued
experimental property.
This also deletes `SetInjectLocalVariables` which isn't used anywhere.
Looking ast the definition of both functions this is *almost* an NFC
change, except that Triple also looks at the SubArch (important) and
ObjectFormat (less so).
This fixes a bug that only manifests with how Xcode uses the SBAPI to
attach to a process by name: it guesses the architecture based on the
system. If the system is arm64 and the Process is arm64e Target fails
to update the triple because it deemed the two to be equivalent.
rdar://123338218
Looking ast the definition of both functions this is *almost* an NFC
change, except that Triple also looks at the SubArch (important) and
ObjectFormat (less so).
This fixes a bug that only manifests with how Xcode uses the SBAPI to
attach to a process by name: it guesses the architecture based on the
system. If the system is arm64 and the Process is arm64e Target fails to
update the triple because it deemed the two to be equivalent.
rdar://123338218
BroadcastEvent currently takes its EventData* param and shoves it into
an Event object, which takes ownership of the pointer and places it into
a shared_ptr to manage the lifetime.
Instead of relying on `new` and passing raw pointers around, I think it
would make more sense to create the shared_ptr up front.
We need to generate events when finalizing, or we won't know that we
succeeded in stopping the process to detach/kill. Instead, we stall and
then after our 20 interrupt timeout, we kill the process (even if we
were supposed to detach) and exit.
OTOH, we have to not generate events when the Process is being
destructed because shared_from_this has already been torn down, and
using it will cause crashes.
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
(cherry picked from commit fc6b72523f)
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
## Description
This pull request adds a new `stop-at-user-entry` option to LLDB
`process launch` command, allowing users to launch a process and pause
execution at the entry point of the program (for C-based languages,
`main` function).
## Motivation
This option provides a convenient way to begin debugging a program by
launching it and breaking at the desired entry point.
## Changes Made
- Added `stop-at-user-entry` option to `Options.td` and the
corresponding case in `CommandOptionsProcessLaunch.cpp` (short option is
'm')
- Implemented `GetUserEntryPointName` method in the Language plugins
available at the moment.
- Declared the `CreateBreakpointAtUserEntry` method in the Target API.
- Create Shell test for the command
`command-process-launch-user-entry.test`.
## Usage
`process launch --stop-at-user-entry` or `process launch -m` launches
the process and pauses execution at the entry point of the program.
This reverts commit a7b78cac9a.
With updates to the tests.
TestWatchTaggedAddress.py: Updated the expected watchpoint types,
though I'm not sure there should be a differnt default for the two
ways of setting them, that needs to be confirmed.
TestStepOverWatchpoint.py: Skipped this everywhere because I think
what used to happen is you couldn't put 2 watchpoints on the same
address (after alignment). I guess that this is now allowed because
modify watchpoints aren't accounted for, but likely should be.
Needs investigating.
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
Re-landing this patch after addressing testsuite failures found in CI on
Linux, Intel machines, and windows.
rdar://108234227
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
rdar://108234227
As suggested by Greg in https://github.com/llvm/llvm-project/pull/66534,
I'm adding a setting at the Target level that controls whether to show
leading zeroes in hex ValueObject values.
This has the benefit of reducing the amount of characters displayed in
certain interfaces, like VSCode.
The remaining use of ConstString in StructuredData is the Dictionary
class. Internally it's backed by a `std::map<ConstString, ObjectSP>`.
I propose that we replace it with a `llvm::StringMap<ObjectSP>`.
Many StructuredData::Dictionary objects are ephemeral and only exist for
a short amount of time. Many of these Dictionaries are only produced
once and are never used again. That leaves us with a lot of string data
in the ConstString StringPool that is sitting there never to be used
again. Even if the same string is used many times for keys of different
Dictionary objects, that is something we can measure and adjust for
instead of assuming that every key may be reused at some point in the
future.
Quick comparisons of key data is likely not a concern with Dictionary,
but the use of `llvm::StringMap` means that lookups should be fast with
its hashing strategy.
Switching to a llvm::StringMap meant that the iteration order may be
different. To account for this when serializing/dumping the dictionary,
I added some code to sort the output by key before emitting anything.
Differential Revision: https://reviews.llvm.org/D159313
ConstString can be implicitly converted into a llvm::StringRef. This is
very useful in many places, but it also hides places where we are
creating a ConstString only to use it as a StringRef for the entire
lifespan of the ConstString object.
I locally removed the implicit conversion and found some of the places we
were doing this.
Differential Revision: https://reviews.llvm.org/D159237
StreamFile subclasses Stream (from lldbUtility) and is backed by a File
(from lldbHost). It does not depend on anything from lldbCore or any of its
sibling libraries, so I think it makes sense for this to live in
lldbHost instead.
Differential Revision: https://reviews.llvm.org/D157460
The comment after the radar link already explains the issue. There's no
additional information in the radar and has been marked as closed by the
corresponding code change. This commit removes the link and reflows the
comment.
This is an enhancement for the locate module callback.
https://discourse.llvm.org/t/rfc-python-callback-for-target-get-module/71580/6
On Android remote platform, module UUID is resolved by
Platform::GetRemoteSharedModule. Which means the current
Target::CallLocateModuleCallbackIfSet() call undesirably is not able to pass the
module UUID to the locate module callback.
This diff moves the CallLocateModuleCallbackIfSet() implementation from Target
to Platform to allows both Target and Platform can call it. One is from the
current Target call site, and second is from Platform after resolving the module
UUID.
As the result of this change, the locate module callback may be called twice
for a same module on remote platforms. And it should be ok.
- First, without UUID.
- The locate module callback is allowed to return an error
if the callback requires UUID.
- Second, with UUID, if the first callback call did not return a module.
Differential Revision: https://reviews.llvm.org/D156066
This reverts commit df054499c3.
Reverting because of build errors
In file included from /Users/buildslave/jenkins/workspace/as-lldb-cmake/llvm-project/lldb/source/API/SBPlatform.cpp:19:
/Users/buildslave/jenkins/workspace/as-lldb-cmake/llvm-project/lldb/include/lldb/Target/Target.h:1035:18: warning: parameter 'merged' not found in the function declaration [-Wdocumentation]
This reverts commit 7f1028e9df.
This is because test failures
lldb-unit.Target/_/TargetTests/LocateModuleCallbackTest.GetOrCreateModuleWithCachedModule
lldb-unit.Target/_/TargetTests/LocateModuleCallbackTest.GetOrCreateModuleWithCachedModuleAndBreakpadSymbol
These methods all take a `Stream *` to get feedback about what's going
on. By default, it's a nullptr, but we always feed it with a valid
pointer. It would therefore make more sense to have this take a
reference.
Differential Revision: https://reviews.llvm.org/D154883
Also, make it possible for new Targets which haven't been added to
the TargetList yet to check for interruption, and add a few more
places in building modules where we can check for interruption.
Differential Revision: https://reviews.llvm.org/D154542
Fix incorrect uses of LLDB_LOG_ERROR. The macro doesn't automatically
inject the error in the log message: it merely passes the error as the
first argument to formatv and therefore must be referenced with {0}.
Thanks to Nicholas Allegra for collecting a list of places where the
macro was misused.
rdar://111581655
Differential revision: https://reviews.llvm.org/D154530
Instead of just returning a raw `const char *`, I think llvm::StringRef
would make more sense. Most of the time that we use the return value of
`GetProcessPluginName` we're passing it to `CreateProcess` which takes a
StringRef anyway.
Differential Revision: https://reviews.llvm.org/D153825
I removed ConstString from OptionValueProperties in 643ba926c1, but
there are a few call sites that still create a ConstString as an
argument. I did not catch these initially because ConstString has an
implicit conversion method to StringRef.
Differential Revision: https://reviews.llvm.org/D153673
This patch add the ability for the user to set a label for a target.
This can be very useful when debugging targets with the same executables
in the same session.
Labels can be set either at the target creation in the command
interpreter or at any time using the SBAPI.
Target labels show up in the `target list` output, following the target
index, and they also allow the user to switch targets using them.
rdar://105016191
Differential Revision: https://reviews.llvm.org/D151859
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
