clang-p2996/lldb/tools/lldb-dap

Table of Contents

• Table of Contents
• Introduction
• Installation for Visual Studio Code
• Configurations
  • Launch Configuration Settings
  • Attaching Settings
  • Example configurations
    • Launching
    • Attach using PID
    • Attach by Name
    • Loading a Core File
• Custom debugger commands
  • startDebugging
  • repl-mode

Introduction

The lldb-dap tool (formerly lldb-vscode) creates a command line tool that implements the Debug Adapter Protocol. It can be installed as an extension for Visual Studio Code and other IDEs supporting DAP. The protocol is easy to run remotely and also can allow other tools and IDEs to get a full featured debugger with a well defined protocol.

Installation for Visual Studio Code

Installing the plug-in involves creating a directory in any location outside of ~/.vscode/extensions. For example, ~/vscode-lldb is a valid one. You'll also need a subfolder bin, e.g. ~/vscode-lldb/bin. Then copy the package.json file that is in the same directory as this documentation into it, and symlink the lldb-dap binary into the bin directory inside the plug-in directory.

Finally, on VS Code, execute the command Developer: Install Extension from Location and pick the folder you just created, which would be ~/vscode-lldb following the example above.

If you want to make a stand alone plug-in that you can send to others on UNIX systems:

mkdir -p ~/llvm-org.lldb-dap-0.1.0/bin
cp package.json ~/llvm-org.lldb-dap-0.1.0
cd ~/llvm-org.lldb-dap-0.1.0/bin
cp /path/to/a/built/lldb-dap .
cp /path/to/a/built/liblldb.so .

If you want to make a stand alone plug-in that you can send to others on macOS systems:

mkdir -p ~/llvm-org.lldb-dap-0.1.0/bin
cp package.json ~/llvm-org.lldb-dap-0.1.0
cd ~/llvm-org.lldb-dap-0.1.0/bin
cp /path/to/a/built/lldb-dap .
rsync -av /path/to/a/built/LLDB.framework LLDB.framework

You might need to create additional directories for the liblldb.so or LLDB.framework inside or next to the bin folder depending on how the rpath is set in your lldb-dap binary. By default the Debug builds of LLDB usually includes the current executable directory in the rpath, so these steps should work for most people.

To create a plug-in that symlinks into your lldb-dap in your build directory:

mkdir -p ~/llvm-org.lldb-dap-0.1.0/bin
cp package.json ~/llvm-org.lldb-dap-0.1.0
cd ~/llvm-org.lldb-dap-0.1.0/bin
ln -s /path/to/a/built/lldb-dap

This is handy if you want to debug and develop the lldb-dap executable when adding features or fixing bugs.

Configurations

Launching to attaching require you to create a launch configuration. This file defines arguments that get passed to lldb-dap and the configuration settings control how the launch or attach happens.

Launch Configuration Settings

When you launch a program with Visual Studio Code you will need to create a launch.json file that defines how your program will be run. The JSON configuration file can contain the following lldb-dap specific launch key/value pairs:

parameter	type	req
name	string	Y	A configuration name that will be displayed in the IDE.
type	string	Y	Must be "lldb-dap".
request	string	Y	Must be "launch".
program	string	Y	Path to the executable to launch.
args	[string]		An array of command line argument strings to be passed to the program being launched.
cwd	string		The program working directory.
env	dictionary		Environment variables to set when launching the program. The format of each environment variable string is "VAR=VALUE" for environment variables with values or just "VAR" for environment variables with no values.
stopOnEntry	boolean		Whether to stop program immediately after launching.
initCommands	[string]		LLDB commands executed upon debugger startup prior to creating the LLDB target. Commands and command output will be sent to the debugger console when they are executed.
preRunCommands	[string]		LLDB commands executed just before launching after the LLDB target has been created. Commands and command output will be sent to the debugger console when they are executed.
stopCommands	[string]		LLDB commands executed just after each stop. Commands and command output will be sent to the debugger console when they are executed.
launchCommands	[string]		LLDB commands executed to launch the program. Commands and command output will be sent to the debugger console when they are executed.
exitCommands	[string]		LLDB commands executed when the program exits. Commands and command output will be sent to the debugger console when they are executed.
terminateCommands	[string]		LLDB commands executed when the debugging session ends. Commands and command output will be sent to the debugger console when they are executed.
sourceMap	[string[2]]		Specify an array of path re-mappings. Each element in the array must be a two element array containing a source and destination pathname.
debuggerRoot	string		Specify a working directory to use when launching lldb-dap. If the debug information in your executable contains relative paths, this option can be used so that lldb-dap can find source files and object files that have relative paths.

Attaching Settings

When attaching to a process using LLDB you can attach in a few ways

1. Attach to an existing process using the process ID
2. Attach to an existing process by name
3. Attach by name by waiting for the next instance of a process to launch

The JSON configuration file can contain the following lldb-dap specific launch key/value pairs:

parameter	type	req
name	string	Y	A configuration name that will be displayed in the IDE.
type	string	Y	Must be "lldb-dap".
request	string	Y	Must be "attach".
program	string		Path to the executable to attach to. This value is optional but can help to resolve breakpoints prior the attaching to the program.
pid	number		The process id of the process you wish to attach to. If pid is omitted, the debugger will attempt to attach to the program by finding a process whose file name matches the file name from porgram. Setting this value to ${command:pickMyProcess} will allow interactive process selection in the IDE.
stopOnEntry	boolean		Whether to stop program immediately after launching.
waitFor	boolean		Wait for the process to launch.
initCommands	[string]		LLDB commands executed upon debugger startup prior to creating the LLDB target. Commands and command output will be sent to the debugger console when they are executed.
preRunCommands	[string]		LLDB commands executed just before launching after the LLDB target has been created. Commands and command output will be sent to the debugger console when they are executed.
stopCommands	[string]		LLDB commands executed just after each stop. Commands and command output will be sent to the debugger console when they are executed.
exitCommands	[string]		LLDB commands executed when the program exits. Commands and command output will be sent to the debugger console when they are executed.
terminateCommands	[string]		LLDB commands executed when the debugging session ends. Commands and command output will be sent to the debugger console when they are executed.
attachCommands	[string]		LLDB commands that will be executed after preRunCommands which take place of the code that normally does the attach. The commands can create a new target and attach or launch it however desired. This allows custom launch and attach configurations. Core files can use target create --core /path/to/core to attach to core files.

Example configurations

Launching

This will launch /tmp/a.out with arguments one, two, and three and adds FOO=1 and bar to the environment:

{
  "type": "lldb-dap",
  "request": "launch",
  "name": "Debug",
  "program": "/tmp/a.out",
  "args": [ "one", "two", "three" ],
  "env": [ "FOO=1", "BAR" ],
}

Attach using PID

This will attach to a process a.out whose process ID is 123:

{
  "type": "lldb-dap",
  "request": "attach",
  "name": "Attach to PID",
  "program": "/tmp/a.out",
  "pid": 123
}

Attach by Name

This will attach to an existing process whose base name matches a.out. All we have to do is leave the pid value out of the above configuration:

{
  "name": "Attach to Name",
  "type": "lldb-dap",
  "request": "attach",
  "program": "/tmp/a.out",
}

If you want to ignore any existing a.out processes and wait for the next instance to be launched you can add the "waitFor" key value pair:

{
  "name": "Attach to Name (wait)",
  "type": "lldb-dap",
  "request": "attach",
  "program": "/tmp/a.out",
  "waitFor": true
}

This will work as long as the architecture, vendor and OS supports waiting for processes. Currently MacOS is the only platform that supports this.

Loading a Core File

This loads the coredump file /cores/123.core associated with the program /tmp/a.out:

{
  "name": "Load coredump",
  "type": "lldb-dap",
  "request": "attach",
  "coreFile": "/cores/123.core",
  "program": "/tmp/a.out"
}

Connect to a Debug Server on the Current Machine

This connects to a debug server (e.g. lldb-server, gdbserver) on the current machine, that is debugging the program /tmp/a.out and listening locally on port 2345.

{
  "name": "Local Debug Server",
  "type": "lldb-dap",
  "request": "attach",
  "program": "/tmp/a.out",
  "attachCommands": ["gdb-remote 2345"],
}

Connect to a Debug Server on Another Machine

This connects to a debug server running on another machine with hostname hostnmame. Which is debugging the program /tmp/a.out and listening on port 5678 of that other machine.

{
  "name": "Remote Debug Server",
  "type": "lldb-dap",
  "request": "attach",
  "program": "/tmp/a.out",
  "attachCommands": ["gdb-remote hostname:5678"],
}

Custom debugger commands

The lldb-dap tool includes additional custom commands to support the Debug Adapter Protocol features.

startDebugging

Using the command lldb-dap startDebugging it is possible to trigger a reverse request to the client requesting a child debug session with the specified configuration. For example, this can be used to attached to forked or spawned processes. For more information see Reverse Requests StartDebugging.

The custom command has the following format:

lldb-dap startDebugging <launch|attach> <configuration>

This will launch a server and then request a child debug session for a client.

{
  "program": "server",
  "postRunCommand": [
    "lldb-dap startDebugging launch '{\"program\":\"client\"}'"
  ]
}

repl-mode

Inspect or adjust the behavior of lldb-dap repl evaluation requests. The supported modes are variable, command and auto.

• variable - Variable mode expressions are evaluated in the context of the current frame. Use a ``` prefix on the command to run an lldb command.
• command - Command mode expressions are evaluated as lldb commands, as a result, values printed by lldb are always stringified representations of the expression output.
• auto - Auto mode will attempt to infer if the expression represents an lldb command or a variable expression. A heuristic is used to infer if the input represents a variable or a command. Use a ``` prefix to ensure an expression is evaluated as a command.

The initial repl-mode can be configured with the cli flag --repl-mode=<mode> and may also be adjusted at runtime using the lldb command lldb-dap repl-mode <mode>.