a6db64ef4a
GNU ld allows sections after a non-SHF_ALLOC section to be covered by PT_LOAD (PR37607) and assigns addresses to non-SHF_ALLOC output sections (similar to SHF_ALLOC NOBITS sections. The location counter is not advanced). This patch tries to fix PR37607 (remove a special case in `Writer<ELFT>::createPhdrs`). To make the created PT_LOAD meaningful, we cannot reset dot to 0 for a middle non-SHF_ALLOC output section. This results in removal of two special cases in LinkerScript::assignOffsets. Non-SHF_ALLOC non-orphan sections can have non-zero addresses like in GNU ld. The zero address rule for non-SHF_ALLOC sections is weakened to apply to orphan only. This results in a special case in createSection and findOrphanPos, respectively. Reviewed By: jhenderson Differential Revision: https://reviews.llvm.org/D85100
140 lines
6.7 KiB
ArmAsm
140 lines
6.7 KiB
ArmAsm
# REQUIRES: x86
|
|
# RUN: llvm-mc -filetype=obj -triple=x86_64-unknown-linux %s -o %t
|
|
|
|
# Empty SECTIONS command.
|
|
# RUN: echo "SECTIONS {}" > %t.script
|
|
# RUN: ld.lld -o %t1 --script %t.script %t
|
|
# RUN: llvm-objdump --section-headers %t1 | \
|
|
# RUN: FileCheck -check-prefix=SEC-DEFAULT %s
|
|
|
|
# SECTIONS command with the same order as default.
|
|
# RUN: echo "SECTIONS { \
|
|
# RUN: .text : { *(.text) } \
|
|
# RUN: .data : { *(.data) } }" > %t.script
|
|
# RUN: ld.lld -o %t2 --script %t.script %t
|
|
# RUN: llvm-objdump --section-headers %t2 | \
|
|
# RUN: FileCheck -check-prefix=SEC-DEFAULT %s
|
|
|
|
# Idx Name Size
|
|
# SEC-DEFAULT: 1 .text 0000000e {{[0-9a-f]*}} TEXT
|
|
# SEC-DEFAULT: 2 .data 00000020 {{[0-9a-f]*}} DATA
|
|
# SEC-DEFAULT: 3 other 00000003 {{[0-9a-f]*}} DATA
|
|
# SEC-DEFAULT: 4 .bss 00000002 {{[0-9a-f]*}} BSS
|
|
# SEC-DEFAULT: 5 .comment 00000008 {{[0-9a-f]*}}
|
|
# SEC-DEFAULT: 6 .symtab 00000030 {{[0-9a-f]*}}
|
|
# SEC-DEFAULT: 7 .shstrtab 0000003b {{[0-9a-f]*}}
|
|
# SEC-DEFAULT: 8 .strtab 00000008 {{[0-9a-f]*}}
|
|
|
|
## Sections are placed in the order specified by the linker script. .data has
|
|
## a PT_LOAD segment, even if it is preceded by a non-alloc section. To
|
|
## allow this, place non-alloc orphan sections at the end and advance
|
|
## location counters for non-alloc non-orphan sections.
|
|
# RUN: echo "SECTIONS { \
|
|
# RUN: .bss : { *(.bss) } \
|
|
# RUN: other : { *(other) } \
|
|
# RUN: .shstrtab : { *(.shstrtab) } \
|
|
# RUN: .symtab : { *(.symtab) } \
|
|
# RUN: .strtab : { *(.strtab) } \
|
|
# RUN: .data : { *(.data) } \
|
|
# RUN: .text : { *(.text) } }" > %t3.lds
|
|
# RUN: ld.lld -o %t3a -T %t3.lds %t
|
|
# RUN: llvm-readelf -S -l %t3a | FileCheck --check-prefix=SEC-ORDER %s
|
|
# RUN: ld.lld -o %t3b -T %t3.lds --unique %t
|
|
# RUN: llvm-readelf -S -l %t3b | FileCheck --check-prefix=SEC-ORDER %s
|
|
|
|
# SEC-ORDER: [Nr] Name Type Address Off Size ES Flg
|
|
# SEC-ORDER: [ 0] NULL 0000000000000000 000000 000000 00
|
|
# SEC-ORDER-NEXT: [ 1] .bss NOBITS 0000000000000000 001000 000002 00 WA
|
|
# SEC-ORDER-NEXT: [ 2] other PROGBITS 0000000000000002 001002 000003 00 WA
|
|
# SEC-ORDER-NEXT: [ 3] .shstrtab STRTAB 0000000000000005 001005 00003b 00
|
|
# SEC-ORDER-NEXT: [ 4] .symtab SYMTAB 0000000000000040 001040 000030 18
|
|
# SEC-ORDER-NEXT: [ 5] .strtab STRTAB 0000000000000070 001070 000008 00
|
|
# SEC-ORDER-NEXT: [ 6] .data PROGBITS 0000000000000078 001078 000020 00 WA
|
|
# SEC-ORDER-NEXT: [ 7] .text PROGBITS 0000000000000098 001098 00000e 00 AX
|
|
# SEC-ORDER-NEXT: [ 8] .comment PROGBITS 0000000000000000 0010a6 000008 01 MS
|
|
|
|
# SEC-ORDER: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
|
|
# SEC-ORDER-NEXT: LOAD 0x001000 0x0000000000000000 0x0000000000000000 0x000098 0x000098 RW 0x1000
|
|
# SEC-ORDER-NEXT: LOAD 0x001098 0x0000000000000098 0x0000000000000098 0x00000e 0x00000e R E 0x1000
|
|
# SEC-ORDER-NEXT: GNU_STACK 0x000000 0x0000000000000000 0x0000000000000000 0x000000 0x000000 RW 0
|
|
|
|
# .text and .data have swapped names but proper sizes and types.
|
|
# RUN: echo "SECTIONS { \
|
|
# RUN: .data : { *(.text) } \
|
|
# RUN: .text : { *(.data) } }" > %t.script
|
|
# RUN: ld.lld -o %t4 --script %t.script %t
|
|
# RUN: llvm-objdump --section-headers %t4 | \
|
|
# RUN: FileCheck -check-prefix=SEC-SWAP-NAMES %s
|
|
|
|
# Idx Name Size
|
|
# SEC-SWAP-NAMES: 1 .data 0000000e {{[0-9a-f]*}} TEXT
|
|
# SEC-SWAP-NAMES: 2 .text 00000020 {{[0-9a-f]*}} DATA
|
|
# SEC-SWAP-NAMES: 3 other 00000003 {{[0-9a-f]*}} DATA
|
|
# SEC-SWAP-NAMES: 4 .bss 00000002 {{[0-9a-f]*}} BSS
|
|
# SEC-SWAP-NAMES: 5 .comment 00000008 {{[0-9a-f]*}}
|
|
# SEC-SWAP-NAMES: 6 .symtab 00000030 {{[0-9a-f]*}}
|
|
# SEC-SWAP-NAMES: 7 .shstrtab 0000003b {{[0-9a-f]*}}
|
|
# SEC-SWAP-NAMES: 8 .strtab 00000008 {{[0-9a-f]*}}
|
|
|
|
# Multiple SECTIONS command specifying additional input section descriptions
|
|
# for the same output section description - input sections are merged into
|
|
# one output section.
|
|
# RUN: echo "SECTIONS { \
|
|
# RUN: .text : { *(.text) } \
|
|
# RUN: .data : { *(.data) } } \
|
|
# RUN: SECTIONS { \
|
|
# RUN: .data : { *(other) } }" > %t.script
|
|
# RUN: ld.lld -o %t6 --script %t.script %t
|
|
# RUN: llvm-objdump --section-headers %t6 | \
|
|
# RUN: FileCheck -check-prefix=SEC-MULTI %s
|
|
|
|
# Idx Name Size
|
|
# SEC-MULTI: 1 .text 0000000e {{[0-9a-f]*}} TEXT
|
|
# SEC-MULTI-NEXT: .data 00000020 {{[0-9a-f]*}} DATA
|
|
# SEC-MULTI-NEXT: .data 00000003 {{[0-9a-f]*}} DATA
|
|
# SEC-MULTI-NEXT: .bss 00000002 {{[0-9a-f]*}} BSS
|
|
# SEC-MULTI-NEXT: .comment 00000008 {{[0-9a-f]*}}
|
|
# SEC-MULTI-NEXT: .symtab 00000030 {{[0-9a-f]*}}
|
|
# SEC-MULTI-NEXT: .shstrtab 00000035 {{[0-9a-f]*}}
|
|
# SEC-MULTI-NEXT: .strtab 00000008 {{[0-9a-f]*}}
|
|
|
|
## other is placed in a PT_LOAD segment even if it is preceded by a non-alloc section.
|
|
## The current implementation places .data, .bss, .comment and other in the same PT_LOAD.
|
|
# RUN: echo 'SECTIONS { \
|
|
# RUN: .text : { *(.text) } \
|
|
# RUN: .data : { *(.data) } \
|
|
# RUN: .comment : { *(.comment) } \
|
|
# RUN: other : { *(other) } }' > %t5.lds
|
|
# RUN: ld.lld -o %t5 -T %t5.lds %t
|
|
# RUN: llvm-readelf -S -l %t5 | FileCheck --check-prefix=SEP-BY-NONALLOC %s
|
|
|
|
# SEP-BY-NONALLOC: [Nr] Name Type Address Off Size ES Flg
|
|
# SEP-BY-NONALLOC: [ 1] .text PROGBITS 0000000000000000 001000 00000e 00 AX
|
|
# SEP-BY-NONALLOC-NEXT: [ 2] .data PROGBITS 000000000000000e 00100e 000020 00 WA
|
|
# SEP-BY-NONALLOC-NEXT: [ 3] .bss NOBITS 000000000000002e 00102e 000002 00 WA
|
|
# SEP-BY-NONALLOC-NEXT: [ 4] .comment PROGBITS 0000000000000030 00102e 000008 01 MS
|
|
# SEP-BY-NONALLOC-NEXT: [ 5] other PROGBITS 0000000000000038 001038 000003 00 WA
|
|
|
|
# SEP-BY-NONALLOC: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align
|
|
# SEP-BY-NONALLOC-NEXT: LOAD 0x001000 0x0000000000000000 0x0000000000000000 0x00000e 0x00000e R E 0x1000
|
|
# SEP-BY-NONALLOC-NEXT: LOAD 0x00100e 0x000000000000000e 0x000000000000000e 0x00002d 0x00002d RW 0x1000
|
|
# SEP-BY-NONALLOC-NEXT: GNU_STACK 0x000000 0x0000000000000000 0x0000000000000000 0x000000 0x000000 RW 0
|
|
|
|
# Input section pattern contains additional semicolon.
|
|
# Case found in linux kernel script. Check we are able to parse it.
|
|
# RUN: echo "SECTIONS { .text : { ;;*(.text);;S = 0;; } }" > %t.script
|
|
# RUN: ld.lld -o /dev/null --script %t.script %t
|
|
|
|
.globl _start
|
|
_start:
|
|
mov $60, %rax
|
|
mov $42, %rdi
|
|
|
|
.section .data,"aw"
|
|
.quad 10, 10, 20, 20
|
|
.section other,"aw"
|
|
.short 10
|
|
.byte 20
|
|
.section .bss,"",@nobits
|
|
.short 0
|